Home > Salary > Denmark > Lead Manufacturing Technician
A lead manufacturing technician is responsible for overseeing the production process in a manufacturing facility. They work closely with the production team to ensure that products are manufactured efficiently and meet quality standards. Their duties include setting up and operating machinery, monitoring production lines, troubleshooting equipment issues, and training new technicians. They also collaborate with other departments such as engineering and quality control to improve processes and resolve any production issues. The lead manufacturing technician must have strong technical skills, knowledge of manufacturing processes, and the ability to lead a team effectively. Attention to detail, problem-solving abilities, and excellent communication skills are essential in this role.
Estimated Yearly Salary: 548,821 DKK
Estimated Monthly Salary: 45,735 DKK
Estimated Weekly Salary: 10,554 DKK per week
Estimated Hourly Salary: 264 DKK per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 44,216 DKK
Estimated Weekly Salary: 10,204 DKK per week
Estimated Hourly Salary: 255 DKK per hour
Last revision of data: 2024-01-05
Estimated Yearly Salary: 78,327 USD
Estimated Monthly Salary: 6,527 USD
Estimated Weekly Salary: 1,506 USD per week
Estimated Hourly Salary: 38 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 548,821 DKK
Estimated Monthly Salary: 45,735 DKK
Estimated Weekly Salary: 10,554 DKK per week
Estimated Hourly Salary: 264 DKK per hour
By working as Lead Manufacturing Technician a person can save up to 3,599 USD per month or 43,191 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Denmark, see costs of living in Denmark.
Estimated Yearly Salary for Lead Manufacturing Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Medical caseworker (361,078 DKK per year, pre-tax.)
Trainmaster (861,356 DKK per year, pre-tax.)
Utilization review (ur), coordinator (319,048 DKK per year, pre-tax.)
Elevator installer (566,370 DKK per year, pre-tax.)
Construction superintendent (594,391 DKK per year, pre-tax.)
Lead Manufacturing Technician salary in Denmark
Average Yearly Salary of Lead Manufacturing Technician in Denmark is approximately 548,821 DKK (78,327 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Lead Manufacturing Technician do?
A lead manufacturing technician is responsible for overseeing the production process in a manufacturing facility. They work closely with the production team to ensure that products are manufactured efficiently and meet quality standards. Their duties include setting up and operating machinery, monitoring production lines, troubleshooting equipment issues, and training new technicians. They also collaborate with other departments such as engineering and quality control to improve processes and resolve any production issues. The lead manufacturing technician must have strong technical skills, knowledge of manufacturing processes, and the ability to lead a team effectively. Attention to detail, problem-solving abilities, and excellent communication skills are essential in this role.
Skills: lead technician, manufacturing, production process, machinery operation, quality control, problem-solving
Job industry: Manufacturing
Job industry: Manufacturing
How much does Lead Manufacturing Technician make?
Salary details
How much does Lead Manufacturing Technician make?Estimated Yearly Salary: 548,821 DKK
Estimated Monthly Salary: 45,735 DKK
Estimated Weekly Salary: 10,554 DKK per week
Estimated Hourly Salary: 264 DKK per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 530,593 DKKEstimated Monthly Salary: 44,216 DKK
Estimated Weekly Salary: 10,204 DKK per week
Estimated Hourly Salary: 255 DKK per hour
Last revision of data: 2024-01-05Lead Manufacturing Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 78,327 USD
Estimated Monthly Salary: 6,527 USD
Estimated Weekly Salary: 1,506 USD per week
Estimated Hourly Salary: 38 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Denmark is a Scandinavian country located in Northern Europe. It has a population of approximately 5.8 million people and covers an area of around 43,094 square kilometers. The country consists of the Jutland Peninsula and numerous islands, including Zealand, Funen, and Bornholm.
Estimated national average yearly salary is 494,627 DKK (73,200 USD). Value indicated is pre-tax. Below graph shows estimated Lead Manufacturing Technician job salary compared to average salary in Denmark.
Comparison shows that a person working as Lead Manufacturing Technician in Denmark earns on average:
1.11 times the average salary (or 111% of average salary).
Estimated national average yearly salary is 494,627 DKK (73,200 USD). Value indicated is pre-tax. Below graph shows estimated Lead Manufacturing Technician job salary compared to average salary in Denmark.
Comparison shows that a person working as Lead Manufacturing Technician in Denmark earns on average:
1.11 times the average salary (or 111% of average salary).
Is Lead Manufacturing Technician a well paid job?
Yes, our data show that Lead Manufacturing Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Lead Manufacturing Technician?
High salary for Lead Manufacturing Technician would be somewhere between 603,703 DKK and 795,790 DKK. However this is an estimation based on Gaussian Distribution.How much can you save working as Lead Manufacturing Technician in Denmark?
Living in Denmark the approximate monthly expenses are: 2,928 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 548,821 DKK
Estimated Monthly Salary: 45,735 DKK
Estimated Weekly Salary: 10,554 DKK per week
Estimated Hourly Salary: 264 DKK per hour
By working as Lead Manufacturing Technician a person can save up to 3,599 USD per month or 43,191 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Denmark, see costs of living in Denmark.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Germany, Sweden, Norway. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Lead Manufacturing Technician
Germany is 57,144 USD
Sweden is 67,769 USD
Norway is 102,306 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Denmark
(5,348,299 DKK per year, pre-tax.)
2. Cardiologist
(4,444,802 DKK per year, pre-tax.)
(4,309,239 DKK per year, pre-tax.)
4. Neurosurgeon
(4,154,976 DKK per year, pre-tax.)
(4,151,728 DKK per year, pre-tax.)
(4,079,039 DKK per year, pre-tax.)
(4,074,872 DKK per year, pre-tax.)
8. Oncologist
(4,073,743 DKK per year, pre-tax.)
9. Urologist
(4,068,231 DKK per year, pre-tax.)
10. Dermatologist
(4,060,246 DKK per year, pre-tax.)
Data as of 2025Random salary:
Medical caseworker (361,078 DKK per year, pre-tax.)
Trainmaster (861,356 DKK per year, pre-tax.)
Utilization review (ur), coordinator (319,048 DKK per year, pre-tax.)
Elevator installer (566,370 DKK per year, pre-tax.)
Construction superintendent (594,391 DKK per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=denmark&job=lead-manufacturing-technician'><img src='https://optisalary.com/wp-content/graphs/salary/lead-manufacturing-technician-salary-in-denmark-2025.jpg' alt='lead manufacturing technician salary in denmark 2025' title='lead manufacturing technician salary in denmark 2025' /></a>
Please note:The salary figures presented here are meant for reference purposes solely.
The salary data on this site is designed for reference purposes only. We provide salary insights derived from multiple sources, but do not guarantee absolute accuracy. Users should always cross-check salary details with other reliable sources before making financial decisions. Fluctuations in salary amounts may occur due to several circumstances, including company policies, market demand, and individual skills. We do not offer any warranty regarding the entirety of the displayed salary information. Use of optisalary.com implies acknowledgment of these conditions.
optisalary.com offers salary insights for educational purposes only. While we gather data from multiple providers, we cannot ensure absolute accuracy. Users are advised to consult trusted organizations before making major financial decisions. Salaries shift due to numerous factors, such as experience, industry trends, and negotiation tactics. We make no guarantee regarding the correctness of the displayed salary figures. Your continued access of this site confirms your understanding of these conditions.