Home > Salary > Denmark > Lathe Operator Numerical Control
A lathe operator numerical control is responsible for operating and maintaining computer-controlled machines that shape and cut metal, wood, or other materials. They read blueprints, set up the machine, and input instructions into the computer system to produce precise and accurate parts. The operator monitors the machine's performance, makes adjustments as needed, and ensures the quality of the finished product. They may also perform routine maintenance on the machine and troubleshoot any issues that arise during the production process. This occupation requires strong technical skills, attention to detail, and the ability to interpret complex instructions and measurements.
Estimated Yearly Salary: 397,540 DKK
Estimated Monthly Salary: 33,128 DKK
Estimated Weekly Salary: 7,645 DKK per week
Estimated Hourly Salary: 191 DKK per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 32,115 DKK
Estimated Weekly Salary: 7,411 DKK per week
Estimated Hourly Salary: 185 DKK per hour
Last revision of data: 2024-01-02
Estimated Yearly Salary: 56,835 USD
Estimated Monthly Salary: 4,736 USD
Estimated Weekly Salary: 1,093 USD per week
Estimated Hourly Salary: 27 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 397,540 DKK
Estimated Monthly Salary: 33,128 DKK
Estimated Weekly Salary: 7,645 DKK per week
Estimated Hourly Salary: 191 DKK per hour
By working as Lathe Operator Numerical Control a person can save up to 1,808 USD per month or 21,699 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Denmark, see costs of living in Denmark.
Estimated Yearly Salary for Lathe Operator Numerical Control
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Hygiene manager (661,395 DKK per year, pre-tax.)
Us sales manager (893,627 DKK per year, pre-tax.)
Fundraising manager (484,734 DKK per year, pre-tax.)
Data capture operator (318,581 DKK per year, pre-tax.)
Water treatment technician (385,378 DKK per year, pre-tax.)
Lathe Operator Numerical Control salary in Denmark
Average Yearly Salary of Lathe Operator Numerical Control in Denmark is approximately 397,540 DKK (56,835 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Lathe Operator Numerical Control do?
A lathe operator numerical control is responsible for operating and maintaining computer-controlled machines that shape and cut metal, wood, or other materials. They read blueprints, set up the machine, and input instructions into the computer system to produce precise and accurate parts. The operator monitors the machine's performance, makes adjustments as needed, and ensures the quality of the finished product. They may also perform routine maintenance on the machine and troubleshoot any issues that arise during the production process. This occupation requires strong technical skills, attention to detail, and the ability to interpret complex instructions and measurements.
Skills: lathe operator, numerical control, computer-controlled machines, metalworking, precision machining, technical skills
Job industry: Manufacturing
Job industry: Manufacturing
How much does Lathe Operator Numerical Control make?
Salary details
How much does Lathe Operator Numerical Control make?Estimated Yearly Salary: 397,540 DKK
Estimated Monthly Salary: 33,128 DKK
Estimated Weekly Salary: 7,645 DKK per week
Estimated Hourly Salary: 191 DKK per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 385,378 DKKEstimated Monthly Salary: 32,115 DKK
Estimated Weekly Salary: 7,411 DKK per week
Estimated Hourly Salary: 185 DKK per hour
Last revision of data: 2024-01-02Lathe Operator Numerical Control estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 56,835 USD
Estimated Monthly Salary: 4,736 USD
Estimated Weekly Salary: 1,093 USD per week
Estimated Hourly Salary: 27 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Denmark is a Scandinavian country located in Northern Europe. It has a population of approximately 5.8 million people and covers an area of around 43,094 square kilometers. The country consists of the Jutland Peninsula and numerous islands, including Zealand, Funen, and Bornholm.
Estimated national average yearly salary is 494,627 DKK (73,200 USD). Value indicated is pre-tax. Below graph shows estimated Lathe Operator Numerical Control job salary compared to average salary in Denmark.
Comparison shows that a person working as Lathe Operator Numerical Control in Denmark earns on average:
0.8 times the average salary (or 80% of average salary).
Estimated national average yearly salary is 494,627 DKK (73,200 USD). Value indicated is pre-tax. Below graph shows estimated Lathe Operator Numerical Control job salary compared to average salary in Denmark.
Comparison shows that a person working as Lathe Operator Numerical Control in Denmark earns on average:
0.8 times the average salary (or 80% of average salary).
Is Lathe Operator Numerical Control a well paid job?
No / we do not have enough data to assess this.What is considered a high salary for Lathe Operator Numerical Control?
High salary for Lathe Operator Numerical Control would be somewhere between 437,294 DKK and 576,433 DKK. However this is an estimation based on Gaussian Distribution.How much can you save working as Lathe Operator Numerical Control in Denmark?
Living in Denmark the approximate monthly expenses are: 2,928 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 397,540 DKK
Estimated Monthly Salary: 33,128 DKK
Estimated Weekly Salary: 7,645 DKK per week
Estimated Hourly Salary: 191 DKK per hour
By working as Lathe Operator Numerical Control a person can save up to 1,808 USD per month or 21,699 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Denmark, see costs of living in Denmark.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Germany, Sweden, Norway. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Lathe Operator Numerical Control
Germany is 41,600 USD
Sweden is 48,882 USD
Norway is 74,458 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Denmark
(5,348,299 DKK per year, pre-tax.)
2. Cardiologist
(4,444,802 DKK per year, pre-tax.)
(4,309,239 DKK per year, pre-tax.)
4. Neurosurgeon
(4,154,976 DKK per year, pre-tax.)
(4,151,728 DKK per year, pre-tax.)
(4,079,039 DKK per year, pre-tax.)
(4,074,872 DKK per year, pre-tax.)
8. Oncologist
(4,073,743 DKK per year, pre-tax.)
9. Urologist
(4,068,231 DKK per year, pre-tax.)
10. Dermatologist
(4,060,246 DKK per year, pre-tax.)
Data as of 2025Random salary:
Hygiene manager (661,395 DKK per year, pre-tax.)
Us sales manager (893,627 DKK per year, pre-tax.)
Fundraising manager (484,734 DKK per year, pre-tax.)
Data capture operator (318,581 DKK per year, pre-tax.)
Water treatment technician (385,378 DKK per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=denmark&job=lathe-operator-numerical-control'><img src='https://optisalary.com/wp-content/graphs/salary/lathe-operator-numerical-control-salary-in-denmark-2025.jpg' alt='lathe operator numerical control salary in denmark 2025' title='lathe operator numerical control salary in denmark 2025' /></a>
Please note:optisalary.com aggregates salary data for informational use only.
The salary data presented here are meant for reference purposes solely. While we attempt to ensure correctness, we cannot guarantee all figures is precise. Users should to confirm salary details with independent sources before making critical career decisions. Salary amounts can fluctuate due to negotiation, industry trends, and location. We deny responsibility for errors in the compensation data displayed.
optisalary.com aggregates salary data for reference purposes exclusively. We strive to provide accurate figures, but do not assure their precision. Users are urged to consult official platforms before making financial decisions. Salary amounts can fluctuate due to geographic location, experience, and industry trends. We assume no liability for inconsistencies in the salary data provided. Your engagement with this site confirms understanding of this policy.