Home > Salary > Denmark > Injection Molding Engineer
An injection molding engineer is responsible for designing and developing manufacturing processes for plastic injection molding. They work closely with product designers to ensure that the design can be effectively produced using injection molding techniques. The engineer analyzes product specifications, creates molds, and determines the appropriate materials and machinery required for the production process. They also troubleshoot any issues that may arise during production and make necessary adjustments to improve efficiency and quality. Additionally, they may collaborate with suppliers to source materials and equipment, and conduct testing and analysis to ensure compliance with industry standards.
Estimated Yearly Salary: 647,192 DKK
Estimated Monthly Salary: 53,933 DKK
Estimated Weekly Salary: 12,446 DKK per week
Estimated Hourly Salary: 311 DKK per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 52,128 DKK
Estimated Weekly Salary: 12,030 DKK per week
Estimated Hourly Salary: 301 DKK per hour
Last revision of data: 2024-01-09
Estimated Yearly Salary: 92,642 USD
Estimated Monthly Salary: 7,720 USD
Estimated Weekly Salary: 1,782 USD per week
Estimated Hourly Salary: 45 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 647,192 DKK
Estimated Monthly Salary: 53,933 DKK
Estimated Weekly Salary: 12,446 DKK per week
Estimated Hourly Salary: 311 DKK per hour
By working as Injection Molding Engineer a person can save up to 4,792 USD per month or 57,506 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Denmark, see costs of living in Denmark.
Estimated Yearly Salary for Injection Molding Engineer
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Linux systems administrator (722,155 DKK per year, pre-tax.)
Audiovisual specialist (502,663 DKK per year, pre-tax.)
Cabin cleaner (201,068 DKK per year, pre-tax.)
Chiropractic therapy assistant (245,749 DKK per year, pre-tax.)
Control automation engineer (834,977 DKK per year, pre-tax.)
Injection Molding Engineer salary in Denmark
Average Yearly Salary of Injection Molding Engineer in Denmark is approximately 647,192 DKK (92,642 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Injection Molding Engineer do?
An injection molding engineer is responsible for designing and developing manufacturing processes for plastic injection molding. They work closely with product designers to ensure that the design can be effectively produced using injection molding techniques. The engineer analyzes product specifications, creates molds, and determines the appropriate materials and machinery required for the production process. They also troubleshoot any issues that may arise during production and make necessary adjustments to improve efficiency and quality. Additionally, they may collaborate with suppliers to source materials and equipment, and conduct testing and analysis to ensure compliance with industry standards.
Skills: Injection Molding Engineer, Manufacturing Process, Plastic Injection Molding, Product Design, Mold Design, Material Selection
Job industry: Manufacturing
Job industry: Manufacturing
How much does Injection Molding Engineer make?
Salary details
How much does Injection Molding Engineer make?Estimated Yearly Salary: 647,192 DKK
Estimated Monthly Salary: 53,933 DKK
Estimated Weekly Salary: 12,446 DKK per week
Estimated Hourly Salary: 311 DKK per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 625,541 DKKEstimated Monthly Salary: 52,128 DKK
Estimated Weekly Salary: 12,030 DKK per week
Estimated Hourly Salary: 301 DKK per hour
Last revision of data: 2024-01-09Injection Molding Engineer estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 92,642 USD
Estimated Monthly Salary: 7,720 USD
Estimated Weekly Salary: 1,782 USD per week
Estimated Hourly Salary: 45 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Denmark is a Scandinavian country located in Northern Europe. It has a population of approximately 5.8 million people and covers an area of around 43,094 square kilometers. The country consists of the Jutland Peninsula and numerous islands, including Zealand, Funen, and Bornholm.
Estimated national average yearly salary is 494,627 DKK (73,200 USD). Value indicated is pre-tax. Below graph shows estimated Injection Molding Engineer job salary compared to average salary in Denmark.
Comparison shows that a person working as Injection Molding Engineer in Denmark earns on average:
1.31 times the average salary (or 131% of average salary).
Estimated national average yearly salary is 494,627 DKK (73,200 USD). Value indicated is pre-tax. Below graph shows estimated Injection Molding Engineer job salary compared to average salary in Denmark.
Comparison shows that a person working as Injection Molding Engineer in Denmark earns on average:
1.31 times the average salary (or 131% of average salary).
Is Injection Molding Engineer a well paid job?
Yes, our data shows that Injection Molding Engineer is a well paid job. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Injection Molding Engineer?
High salary for Injection Molding Engineer would be somewhere between 711,911 DKK and 938,428 DKK. However this is an estimation based on Gaussian Distribution.How much can you save working as Injection Molding Engineer in Denmark?
Living in Denmark the approximate monthly expenses are: 2,928 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 647,192 DKK
Estimated Monthly Salary: 53,933 DKK
Estimated Weekly Salary: 12,446 DKK per week
Estimated Hourly Salary: 311 DKK per hour
By working as Injection Molding Engineer a person can save up to 4,792 USD per month or 57,506 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Denmark, see costs of living in Denmark.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Germany, Sweden, Norway. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Injection Molding Engineer
Germany is 67,641 USD
Sweden is 79,606 USD
Norway is 120,238 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Denmark
(5,348,299 DKK per year, pre-tax.)
2. Cardiologist
(4,444,802 DKK per year, pre-tax.)
(4,309,239 DKK per year, pre-tax.)
4. Neurosurgeon
(4,154,976 DKK per year, pre-tax.)
(4,151,728 DKK per year, pre-tax.)
(4,079,039 DKK per year, pre-tax.)
(4,074,872 DKK per year, pre-tax.)
8. Oncologist
(4,073,743 DKK per year, pre-tax.)
9. Urologist
(4,068,231 DKK per year, pre-tax.)
10. Dermatologist
(4,060,246 DKK per year, pre-tax.)
Data as of 2025Random salary:
Linux systems administrator (722,155 DKK per year, pre-tax.)
Audiovisual specialist (502,663 DKK per year, pre-tax.)
Cabin cleaner (201,068 DKK per year, pre-tax.)
Chiropractic therapy assistant (245,749 DKK per year, pre-tax.)
Control automation engineer (834,977 DKK per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=denmark&job=injection-molding-engineer'><img src='https://optisalary.com/wp-content/graphs/salary/injection-molding-engineer-salary-in-denmark-2025.jpg' alt='injection molding engineer salary in denmark 2025' title='injection molding engineer salary in denmark 2025' /></a>
Please note:This website presents salary estimates for educational purposes exclusively.
The salary estimates on optisalary.com are meant for informational use exclusively. We collect salary data from multiple providers, but cannot guarantee complete precision. Users must on their own confirm salaries before making financial decisions. Salary variations occur due to company policies, negotiation skills, and experience levels. We disclaim any guarantee regarding the correctness of the listed salary data. By using this site, you agree that salary data is subject to updates.
optisalary.com displays salary data exclusively for informational purposes. While we strive for accuracy, we do not guarantee the precision of all figures. Users must double-check salary details with reliable sources before making financial plans. Salary estimates may vary based on multiple elements, such as geographic location, experience, and job role. We accept no responsibility for misinterpretations in the pay estimates provided. By using this website, you acknowledge that salary data is subject to change.