Home > Salary > Denmark > Cnc Service Engineer
A CNC service engineer is responsible for maintaining, repairing, and troubleshooting computer numerical control (CNC) machines used in manufacturing processes. They ensure that the machines are operating efficiently and at optimal performance levels. Their duties include conducting regular inspections, diagnosing and resolving technical issues, calibrating machines, programming software, and providing training to machine operators. They may also be involved in installing new equipment and upgrading existing systems. A CNC service engineer needs to have a strong understanding of mechanical and electrical systems, as well as knowledge of programming languages and computer-aided design (CAD) software. They must possess excellent problem-solving skills and be able to work independently or as part of a team.
Estimated Yearly Salary: 485,734 DKK
Estimated Monthly Salary: 40,478 DKK
Estimated Weekly Salary: 9,341 DKK per week
Estimated Hourly Salary: 234 DKK per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 39,096 DKK
Estimated Weekly Salary: 9,022 DKK per week
Estimated Hourly Salary: 226 DKK per hour
Last revision of data: 2024-01-03
Estimated Yearly Salary: 69,433 USD
Estimated Monthly Salary: 5,786 USD
Estimated Weekly Salary: 1,335 USD per week
Estimated Hourly Salary: 33 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 485,734 DKK
Estimated Monthly Salary: 40,478 DKK
Estimated Weekly Salary: 9,341 DKK per week
Estimated Hourly Salary: 234 DKK per hour
By working as Cnc Service Engineer a person can save up to 2,858 USD per month or 34,297 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Denmark, see costs of living in Denmark.
Estimated Yearly Salary for Cnc Service Engineer
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Respite supervisor (340,697 DKK per year, pre-tax.)
Financial consultant (550,686 DKK per year, pre-tax.)
Patient care technician (240,379 DKK per year, pre-tax.)
Auditing director (977,403 DKK per year, pre-tax.)
Investor relations associate (664,636 DKK per year, pre-tax.)
Cnc Service Engineer salary in Denmark
Average Yearly Salary of Cnc Service Engineer in Denmark is approximately 485,734 DKK (69,433 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Cnc Service Engineer do?
A CNC service engineer is responsible for maintaining, repairing, and troubleshooting computer numerical control (CNC) machines used in manufacturing processes. They ensure that the machines are operating efficiently and at optimal performance levels. Their duties include conducting regular inspections, diagnosing and resolving technical issues, calibrating machines, programming software, and providing training to machine operators. They may also be involved in installing new equipment and upgrading existing systems. A CNC service engineer needs to have a strong understanding of mechanical and electrical systems, as well as knowledge of programming languages and computer-aided design (CAD) software. They must possess excellent problem-solving skills and be able to work independently or as part of a team.
Skills: CNC service engineer, maintenance, repair, troubleshooting, CNC machines, mechanical engineering
Job industry: Manufacturing
Job industry: Manufacturing
How much does Cnc Service Engineer make?
Salary details
How much does Cnc Service Engineer make?Estimated Yearly Salary: 485,734 DKK
Estimated Monthly Salary: 40,478 DKK
Estimated Weekly Salary: 9,341 DKK per week
Estimated Hourly Salary: 234 DKK per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 469,154 DKKEstimated Monthly Salary: 39,096 DKK
Estimated Weekly Salary: 9,022 DKK per week
Estimated Hourly Salary: 226 DKK per hour
Last revision of data: 2024-01-03Cnc Service Engineer estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 69,433 USD
Estimated Monthly Salary: 5,786 USD
Estimated Weekly Salary: 1,335 USD per week
Estimated Hourly Salary: 33 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Denmark is a Scandinavian country located in Northern Europe. It has a population of approximately 5.8 million people and covers an area of around 43,094 square kilometers. The country consists of the Jutland Peninsula and numerous islands, including Zealand, Funen, and Bornholm.
Estimated national average yearly salary is 494,627 DKK (73,200 USD). Value indicated is pre-tax. Below graph shows estimated Cnc Service Engineer job salary compared to average salary in Denmark.
Comparison shows that a person working as Cnc Service Engineer in Denmark earns on average:
0.98 times the average salary (or 98% of average salary).
Estimated national average yearly salary is 494,627 DKK (73,200 USD). Value indicated is pre-tax. Below graph shows estimated Cnc Service Engineer job salary compared to average salary in Denmark.
Comparison shows that a person working as Cnc Service Engineer in Denmark earns on average:
0.98 times the average salary (or 98% of average salary).
Is Cnc Service Engineer a well paid job?
Yes, our data show that Cnc Service Engineer is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Cnc Service Engineer?
High salary for Cnc Service Engineer would be somewhere between 534,307 DKK and 704,314 DKK. However this is an estimation based on Gaussian Distribution.How much can you save working as Cnc Service Engineer in Denmark?
Living in Denmark the approximate monthly expenses are: 2,928 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 485,734 DKK
Estimated Monthly Salary: 40,478 DKK
Estimated Weekly Salary: 9,341 DKK per week
Estimated Hourly Salary: 234 DKK per hour
By working as Cnc Service Engineer a person can save up to 2,858 USD per month or 34,297 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Denmark, see costs of living in Denmark.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Germany, Sweden, Norway. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Cnc Service Engineer
Germany is 50,734 USD
Sweden is 59,484 USD
Norway is 90,494 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Denmark
(5,348,299 DKK per year, pre-tax.)
2. Cardiologist
(4,444,802 DKK per year, pre-tax.)
(4,309,239 DKK per year, pre-tax.)
4. Neurosurgeon
(4,154,976 DKK per year, pre-tax.)
(4,151,728 DKK per year, pre-tax.)
(4,079,039 DKK per year, pre-tax.)
(4,074,872 DKK per year, pre-tax.)
8. Oncologist
(4,073,743 DKK per year, pre-tax.)
9. Urologist
(4,068,231 DKK per year, pre-tax.)
10. Dermatologist
(4,060,246 DKK per year, pre-tax.)
Data as of 2025Random salary:
Respite supervisor (340,697 DKK per year, pre-tax.)
Financial consultant (550,686 DKK per year, pre-tax.)
Patient care technician (240,379 DKK per year, pre-tax.)
Auditing director (977,403 DKK per year, pre-tax.)
Investor relations associate (664,636 DKK per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=denmark&job=cnc-service-engineer'><img src='https://optisalary.com/wp-content/graphs/salary/cnc-service-engineer-salary-in-denmark-2025.jpg' alt='cnc service engineer salary in denmark 2025' title='cnc service engineer salary in denmark 2025' /></a>
Please note:optisalary.com presents salary data for reference use only.
optisalary.com offers salary estimates for educational purposes only. While we collect data from various sources, we cannot ensure absolute accuracy. Users are advised to consult trusted organizations before making major financial moves. Salaries fluctuate due to various factors, such as experience, industry trends, and negotiation tactics. We make no guarantee regarding the correctness of the displayed salary data. Your continued access of this site indicates your understanding of these conditions.
optisalary.com presents salary data for informational use only. We strive to provide accurate figures, but cannot assure their validity. Users are encouraged to consult official sources before making financial choices. Salary ranges can fluctuate due to geographic location, experience, and industry trends. We assume no responsibility for errors in the salary information provided. Your continued use with this site confirms agreement of this policy.