Home > Salary > Czech Republic > Wafer Fabrication Operator
A wafer fabrication operator is responsible for operating and maintaining the equipment used in the production of semiconductor wafers. They work in cleanroom environments and follow strict safety protocols to ensure the quality and efficiency of the fabrication process. Their main tasks include setting up and calibrating machines, monitoring production processes, conducting regular inspections, troubleshooting equipment issues, and performing routine maintenance.
This occupation requires strong attention to detail, technical skills, and the ability to work in a fast-paced and highly controlled environment. Wafer fabrication operators must have knowledge of semiconductor manufacturing processes, equipment operation, and quality control procedures. They should be able to interpret technical specifications and use various tools and instruments to measure and test the wafers.
Estimated Yearly Salary: 446,032 CZK
Estimated Monthly Salary: 37,169 CZK
Estimated Weekly Salary: 8,578 CZK per week
Estimated Hourly Salary: 214 CZK per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 35,940 CZK
Estimated Weekly Salary: 8,294 CZK per week
Estimated Hourly Salary: 207 CZK per hour
Last revision of data: 2024-01-06
Estimated Yearly Salary: 18,594 USD
Estimated Monthly Salary: 1,550 USD
Estimated Weekly Salary: 358 USD per week
Estimated Hourly Salary: 9 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 446,032 CZK
Estimated Monthly Salary: 37,169 CZK
Estimated Weekly Salary: 8,578 CZK per week
Estimated Hourly Salary: 214 CZK per hour
By working as Wafer Fabrication Operator a person can save up to 486 USD per month or 5,831 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Czech Republic, see costs of living in Czech Republic.
Estimated Yearly Salary for Wafer Fabrication Operator
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Commissioning engineer (911,449 CZK per year, pre-tax.)
Information technology (it), lead (838,885 CZK per year, pre-tax.)
Medical billing supervisor (445,384 CZK per year, pre-tax.)
Senior product manager (1,318,609 CZK per year, pre-tax.)
Conveyor operator (354,744 CZK per year, pre-tax.)
Wafer Fabrication Operator salary in Czech Republic
Average Yearly Salary of Wafer Fabrication Operator in Czech Republic is approximately 446,032 CZK (18,594 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Wafer Fabrication Operator do?

Skills: Wafer fabrication, Semiconductor manufacturing, Equipment operation, Cleanroom environment, Quality control, Technical skills.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Wafer Fabrication Operator make?
Salary details
How much does Wafer Fabrication Operator make?Estimated Yearly Salary: 446,032 CZK
Estimated Monthly Salary: 37,169 CZK
Estimated Weekly Salary: 8,578 CZK per week
Estimated Hourly Salary: 214 CZK per hour
Comparing salary to last year:
Estimated Yearly Salary: 431,280 CZKEstimated Monthly Salary: 35,940 CZK
Estimated Weekly Salary: 8,294 CZK per week
Estimated Hourly Salary: 207 CZK per hour
Wafer Fabrication Operator estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 18,594 USD
Estimated Monthly Salary: 1,550 USD
Estimated Weekly Salary: 358 USD per week
Estimated Hourly Salary: 9 USD per hour
Difference in salary year over year or average salary increase is approximately
About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
The Czech Republic, located in Central Europe, is a landlocked country bordered by Germany, Austria, Slovakia, and Poland. With a population of approximately 10.7 million people, it covers an area of around 78,866 square kilometers. The capital and largest city is Prague, known for its stunning architecture and rich history.
Estimated national average yearly salary is 586,044 CZK (26,590 USD). Value indicated is pre-tax. Below graph shows estimated Wafer Fabrication Operator job salary compared to average salary in Czech Republic.
Comparison shows that a person working as Wafer Fabrication Operator in Czech Republic earns on average:
0.76 times the average salary (or 76% of average salary).
Estimated national average yearly salary is 586,044 CZK (26,590 USD). Value indicated is pre-tax. Below graph shows estimated Wafer Fabrication Operator job salary compared to average salary in Czech Republic.
Comparison shows that a person working as Wafer Fabrication Operator in Czech Republic earns on average:
0.76 times the average salary (or 76% of average salary).
Is Wafer Fabrication Operator a well paid job?
No, our data shows that Wafer Fabrication Operator is typically not a well-paid job. The salary varies based on experience. Meaning that even though Wafer Fabrication Operator might be a low paying job, with experience the salary might increase to satisfactory levels.What is considered a high salary for Wafer Fabrication Operator?
High salary for Wafer Fabrication Operator would be somewhere between 490,635 CZK and 646,746 CZK. However this is an estimation based on Gaussian Distribution.How much can you save working as Wafer Fabrication Operator in Czech Republic?
Living in Czech Republic the approximate monthly expenses are: 1,064 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 446,032 CZK
Estimated Monthly Salary: 37,169 CZK
Estimated Weekly Salary: 8,578 CZK per week
Estimated Hourly Salary: 214 CZK per hour
By working as Wafer Fabrication Operator a person can save up to 486 USD per month or 5,831 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Czech Republic, see costs of living in Czech Republic.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Germany, Austria, Slovakia, Poland. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Wafer Fabrication Operator
Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
- 6 to 10 years of experience yields
- 11 to 15 years of experience yields
- 16 to 25 years of experience yields
- more than 25 years of experience yields
Top 10 highest salaries in Czech Republic
(6,643,450 CZK per year, pre-tax.)
2. Cardiologist
(5,564,136 CZK per year, pre-tax.)
(5,372,904 CZK per year, pre-tax.)
4. Neurosurgeon
(5,182,653 CZK per year, pre-tax.)
(5,181,197 CZK per year, pre-tax.)
6. Urologist
(5,079,668 CZK per year, pre-tax.)
(5,078,505 CZK per year, pre-tax.)
(5,075,973 CZK per year, pre-tax.)
9. Oncologist
(5,069,262 CZK per year, pre-tax.)
(5,067,981 CZK per year, pre-tax.)
Random salary:
Commissioning engineer (911,449 CZK per year, pre-tax.)
Information technology (it), lead (838,885 CZK per year, pre-tax.)
Medical billing supervisor (445,384 CZK per year, pre-tax.)
Senior product manager (1,318,609 CZK per year, pre-tax.)
Conveyor operator (354,744 CZK per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.

This website offers salary estimates for educational purposes only.
The salary estimates on optisalary.com are meant for reference use only. We collect salary data from varied sources, but cannot guarantee complete accuracy. Users must on their own confirm salaries before making career commitments. Salary variations occur due to company policies, negotiation skills, and experience levels. We deny any guarantee regarding the correctness of the listed salary data. By using this site, you agree that salary data is subject to updates.
This website provides salary data solely for informational use. While we endeavor for accuracy, we do not guarantee the validity of all figures. Users should double-check salary details with official organizations before making financial decisions. Salary amounts can vary based on numerous elements, such as company size, negotiation tactics, and industry demand. We accept no responsibility for misinterpretations in the pay figures provided. By using this website, you acknowledge that salary data is subject to change.