Home > Salary > Czech Republic > Cnc Milling Operator
A CNC milling operator is responsible for operating computer numerical control (CNC) machines to produce precision parts and components. They work in manufacturing settings, using technical drawings and specifications to set up the machines, inputting commands, and monitoring the process to ensure accuracy and quality. The operator must have a strong understanding of CNC programming, tooling, and machine maintenance. They may also be required to perform routine checks, troubleshoot issues, and make adjustments as needed. Attention to detail, problem-solving skills, and the ability to work independently are essential for this occupation.
Estimated Yearly Salary: 476,748 CZK
Estimated Monthly Salary: 39,729 CZK
Estimated Weekly Salary: 9,168 CZK per week
Estimated Hourly Salary: 229 CZK per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 38,258 CZK
Estimated Weekly Salary: 8,829 CZK per week
Estimated Hourly Salary: 221 CZK per hour
Last revision of data: 2024-01-08
Estimated Yearly Salary: 19,865 USD
Estimated Monthly Salary: 1,655 USD
Estimated Weekly Salary: 382 USD per week
Estimated Hourly Salary: 10 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 476,748 CZK
Estimated Monthly Salary: 39,729 CZK
Estimated Weekly Salary: 9,168 CZK per week
Estimated Hourly Salary: 229 CZK per hour
By working as Cnc Milling Operator a person can save up to 592 USD per month or 7,102 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Czech Republic, see costs of living in Czech Republic.
Estimated Yearly Salary for Cnc Milling Operator
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Development coordinator non-profit organization (521,688 CZK per year, pre-tax.)
Lead pharmacist (1,134,042 CZK per year, pre-tax.)
International operations manager (688,717 CZK per year, pre-tax.)
Talent acquisition consultant (685,664 CZK per year, pre-tax.)
International trade compliance officer (939,048 CZK per year, pre-tax.)
Cnc Milling Operator salary in Czech Republic
Average Yearly Salary of Cnc Milling Operator in Czech Republic is approximately 476,748 CZK (19,865 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Cnc Milling Operator do?
A CNC milling operator is responsible for operating computer numerical control (CNC) machines to produce precision parts and components. They work in manufacturing settings, using technical drawings and specifications to set up the machines, inputting commands, and monitoring the process to ensure accuracy and quality. The operator must have a strong understanding of CNC programming, tooling, and machine maintenance. They may also be required to perform routine checks, troubleshoot issues, and make adjustments as needed. Attention to detail, problem-solving skills, and the ability to work independently are essential for this occupation.
Skills: CNC milling, CNC operator, Precision machining, Manufacturing, Technical drawing, Machine maintenance
Job industry: Manufacturing
Job industry: Manufacturing
How much does Cnc Milling Operator make?
Salary details
How much does Cnc Milling Operator make?Estimated Yearly Salary: 476,748 CZK
Estimated Monthly Salary: 39,729 CZK
Estimated Weekly Salary: 9,168 CZK per week
Estimated Hourly Salary: 229 CZK per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 459,096 CZKEstimated Monthly Salary: 38,258 CZK
Estimated Weekly Salary: 8,829 CZK per week
Estimated Hourly Salary: 221 CZK per hour
Last revision of data: 2024-01-08Cnc Milling Operator estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 19,865 USD
Estimated Monthly Salary: 1,655 USD
Estimated Weekly Salary: 382 USD per week
Estimated Hourly Salary: 10 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
The Czech Republic, located in Central Europe, is a landlocked country bordered by Germany, Austria, Slovakia, and Poland. With a population of approximately 10.7 million people, it covers an area of around 78,866 square kilometers. The capital and largest city is Prague, known for its stunning architecture and rich history.
Estimated national average yearly salary is 586,044 CZK (26,590 USD). Value indicated is pre-tax. Below graph shows estimated Cnc Milling Operator job salary compared to average salary in Czech Republic.
Comparison shows that a person working as Cnc Milling Operator in Czech Republic earns on average:
0.81 times the average salary (or 81% of average salary).
Estimated national average yearly salary is 586,044 CZK (26,590 USD). Value indicated is pre-tax. Below graph shows estimated Cnc Milling Operator job salary compared to average salary in Czech Republic.
Comparison shows that a person working as Cnc Milling Operator in Czech Republic earns on average:
0.81 times the average salary (or 81% of average salary).
Is Cnc Milling Operator a well paid job?
No / we do not have enough data to assess this.What is considered a high salary for Cnc Milling Operator?
High salary for Cnc Milling Operator would be somewhere between 524,423 CZK and 691,285 CZK. However this is an estimation based on Gaussian Distribution.How much can you save working as Cnc Milling Operator in Czech Republic?
Living in Czech Republic the approximate monthly expenses are: 1,064 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 476,748 CZK
Estimated Monthly Salary: 39,729 CZK
Estimated Weekly Salary: 9,168 CZK per week
Estimated Hourly Salary: 229 CZK per hour
By working as Cnc Milling Operator a person can save up to 592 USD per month or 7,102 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Czech Republic, see costs of living in Czech Republic.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Germany, Austria, Slovakia, Poland. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Cnc Milling Operator
Germany is 39,798 USD
Austria is 41,738 USD
Slovakia is 16,403 USD
Poland is 13,701 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Czech Republic
(6,643,450 CZK per year, pre-tax.)
2. Cardiologist
(5,564,136 CZK per year, pre-tax.)
(5,372,904 CZK per year, pre-tax.)
4. Neurosurgeon
(5,182,653 CZK per year, pre-tax.)
(5,181,197 CZK per year, pre-tax.)
6. Urologist
(5,079,668 CZK per year, pre-tax.)
(5,078,505 CZK per year, pre-tax.)
(5,075,973 CZK per year, pre-tax.)
9. Oncologist
(5,069,262 CZK per year, pre-tax.)
(5,067,981 CZK per year, pre-tax.)
Data as of 2025Random salary:
Development coordinator non-profit organization (521,688 CZK per year, pre-tax.)
Lead pharmacist (1,134,042 CZK per year, pre-tax.)
International operations manager (688,717 CZK per year, pre-tax.)
Talent acquisition consultant (685,664 CZK per year, pre-tax.)
International trade compliance officer (939,048 CZK per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=czech-republic&job=cnc-milling-operator'><img src='https://optisalary.com/wp-content/graphs/salary/cnc-milling-operator-salary-in-czech-republic-2025.jpg' alt='cnc milling operator salary in czech republic 2025' title='cnc milling operator salary in czech republic 2025' /></a>
Please note:This website presents salary insights for informational purposes only.
All salary figures on this website are for informational purposes exclusively. We gather data from various reliable sources, yet cannot ensure complete precision. Before making career decisions, visitors should cross-check with external authoritative sources. Salaries fluctuate due to several factors, including economic conditions, job market trends, and geographic location. We disclaim any liability for errors in the salary estimates provided here. Your use with this website constitutes acceptance of this disclaimer.
This website offers salary insights for educational purposes exclusively. While we collect data from multiple providers, we do not ensure full reliability. Users are advised to consult trusted organizations before making major financial moves. Salaries shift due to numerous elements, such as market demand, employer policies, and geographic location. We cannot provide guarantee regarding the validity of the displayed salary data. Your continued access of this site confirms your understanding of these terms.