Home > Salary > Czech Republic > 3d Printer Technician
A 3D printer technician is responsible for the maintenance, troubleshooting, and repair of 3D printers. They possess a deep understanding of the technology and are skilled in operating various types of 3D printers. Their primary role is to ensure that the printers are functioning optimally, producing high-quality prints, and meeting the desired specifications.
A 3D printer technician performs regular inspections and preventative maintenance on the printers, identifies any issues or malfunctions, and carries out necessary repairs or replacements. They also calibrate the machines, adjust settings, and update software as needed. Additionally, they may provide technical support and guidance to users, assisting them with design files, material selection, and print settings.
Estimated Yearly Salary: 606,139 CZK
Estimated Monthly Salary: 50,512 CZK
Estimated Weekly Salary: 11,657 CZK per week
Estimated Hourly Salary: 291 CZK per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 48,692 CZK
Estimated Weekly Salary: 11,237 CZK per week
Estimated Hourly Salary: 281 CZK per hour
Last revision of data: 2024-01-06
Estimated Yearly Salary: 25,152 USD
Estimated Monthly Salary: 2,096 USD
Estimated Weekly Salary: 484 USD per week
Estimated Hourly Salary: 12 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 606,139 CZK
Estimated Monthly Salary: 50,512 CZK
Estimated Weekly Salary: 11,657 CZK per week
Estimated Hourly Salary: 291 CZK per hour
By working as 3d Printer Technician a person can save up to 1,032 USD per month or 12,389 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Czech Republic, see costs of living in Czech Republic.
Estimated Yearly Salary for 3d Printer Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Aircraft maintenance supervisor (797,010 CZK per year, pre-tax.)
Help desk manager (835,502 CZK per year, pre-tax.)
Benefits coordinator (497,380 CZK per year, pre-tax.)
Marine biologist (656,373 CZK per year, pre-tax.)
Secret service agent (668,099 CZK per year, pre-tax.)
3d Printer Technician salary in Czech Republic
Average Yearly Salary of 3d Printer Technician in Czech Republic is approximately 606,139 CZK (25,152 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does 3d Printer Technician do?
A 3D printer technician is responsible for the maintenance, troubleshooting, and repair of 3D printers. They possess a deep understanding of the technology and are skilled in operating various types of 3D printers. Their primary role is to ensure that the printers are functioning optimally, producing high-quality prints, and meeting the desired specifications.
A 3D printer technician performs regular inspections and preventative maintenance on the printers, identifies any issues or malfunctions, and carries out necessary repairs or replacements. They also calibrate the machines, adjust settings, and update software as needed. Additionally, they may provide technical support and guidance to users, assisting them with design files, material selection, and print settings.
Skills: 3D printing, Printer maintenance, Troubleshooting, Repair, Calibration, Technical support.
Job industry: Manufacturing
Job industry: Manufacturing
How much does 3d Printer Technician make?
Salary details
How much does 3d Printer Technician make?Estimated Yearly Salary: 606,139 CZK
Estimated Monthly Salary: 50,512 CZK
Estimated Weekly Salary: 11,657 CZK per week
Estimated Hourly Salary: 291 CZK per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 584,304 CZKEstimated Monthly Salary: 48,692 CZK
Estimated Weekly Salary: 11,237 CZK per week
Estimated Hourly Salary: 281 CZK per hour
Last revision of data: 2024-01-063d Printer Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 25,152 USD
Estimated Monthly Salary: 2,096 USD
Estimated Weekly Salary: 484 USD per week
Estimated Hourly Salary: 12 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
The Czech Republic, located in Central Europe, is a landlocked country bordered by Germany, Austria, Slovakia, and Poland. With a population of approximately 10.7 million people, it covers an area of around 78,866 square kilometers. The capital and largest city is Prague, known for its stunning architecture and rich history.
Estimated national average yearly salary is 586,044 CZK (26,590 USD). Value indicated is pre-tax. Below graph shows estimated 3d Printer Technician job salary compared to average salary in Czech Republic.
Comparison shows that a person working as 3d Printer Technician in Czech Republic earns on average:
1.03 times the average salary (or 103% of average salary).
Estimated national average yearly salary is 586,044 CZK (26,590 USD). Value indicated is pre-tax. Below graph shows estimated 3d Printer Technician job salary compared to average salary in Czech Republic.
Comparison shows that a person working as 3d Printer Technician in Czech Republic earns on average:
1.03 times the average salary (or 103% of average salary).
Is 3d Printer Technician a well paid job?
Yes, our data show that 3d Printer Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for 3d Printer Technician?
High salary for 3d Printer Technician would be somewhere between 666,753 CZK and 878,902 CZK. However this is an estimation based on Gaussian Distribution.How much can you save working as 3d Printer Technician in Czech Republic?
Living in Czech Republic the approximate monthly expenses are: 1,064 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 606,139 CZK
Estimated Monthly Salary: 50,512 CZK
Estimated Weekly Salary: 11,657 CZK per week
Estimated Hourly Salary: 291 CZK per hour
By working as 3d Printer Technician a person can save up to 1,032 USD per month or 12,389 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Czech Republic, see costs of living in Czech Republic.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Germany, Austria, Slovakia, Poland. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for 3d Printer Technician
Germany is 50,513 USD
Austria is 53,175 USD
Slovakia is 20,922 USD
Poland is 17,426 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Czech Republic
(6,643,450 CZK per year, pre-tax.)
2. Cardiologist
(5,564,136 CZK per year, pre-tax.)
(5,372,904 CZK per year, pre-tax.)
4. Neurosurgeon
(5,182,653 CZK per year, pre-tax.)
(5,181,197 CZK per year, pre-tax.)
6. Urologist
(5,079,668 CZK per year, pre-tax.)
(5,078,505 CZK per year, pre-tax.)
(5,075,973 CZK per year, pre-tax.)
9. Oncologist
(5,069,262 CZK per year, pre-tax.)
(5,067,981 CZK per year, pre-tax.)
Data as of 2025Random salary:
Aircraft maintenance supervisor (797,010 CZK per year, pre-tax.)
Help desk manager (835,502 CZK per year, pre-tax.)
Benefits coordinator (497,380 CZK per year, pre-tax.)
Marine biologist (656,373 CZK per year, pre-tax.)
Secret service agent (668,099 CZK per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=czech-republic&job=3d-printer-technician'><img src='https://optisalary.com/wp-content/graphs/salary/3d-printer-technician-salary-in-czech-republic-2025.jpg' alt='3d printer technician salary in czech republic 2025' title='3d printer technician salary in czech republic 2025' /></a>
Please note:The salary estimates on optisalary.com are meant for informational purposes exclusively.
The salary data on this site is designed for informational purposes exclusively. We offer salary insights based on multiple datasets, but cannot guarantee absolute precision. Users should always cross-check salary details with other trusted sources before making career-related choices. Fluctuations in salary amounts may occur due to various circumstances, including location, experience, and industry. We do not extend any warranty regarding the entirety of the provided salary data. Use of this website constitutes acceptance of these conditions.
Salary details displayed on this website are intended for informational purposes only. Our data comes from various inputs and may not always be up to date. Users must cross-reference salary information independently before making employment decisions. The figures listed here may fluctuate due to factors such as company policies, experience levels, and demand shifts. We cannot warrant that the data provided is flawless. By accessing this website, you agree that salary information is offered 'as is' and without warranties.