Home > Salary > China > Metrology Calibration Technician
A Metrology Calibration Technician is responsible for ensuring the accuracy and precision of measurement and testing equipment used in various industries. They calibrate and maintain instruments such as gauges, meters, scales, oscilloscopes, and thermometers to ensure they meet specified standards and regulations. These technicians perform adjustments, repairs, and troubleshooting of equipment to ensure accurate readings and reliable performance. They may also create calibration procedures, document test results, and maintain calibration records.
Estimated Yearly Salary: 100,921 CNY
Estimated Monthly Salary: 8,410 CNY
Estimated Weekly Salary: 1,941 CNY per week
Estimated Hourly Salary: 49 CNY per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 8,124 CNY
Estimated Weekly Salary: 1,875 CNY per week
Estimated Hourly Salary: 47 CNY per hour
Last revision of data: 2024-01-08
Estimated Yearly Salary: 12,630 USD
Estimated Monthly Salary: 1,053 USD
Estimated Weekly Salary: 243 USD per week
Estimated Hourly Salary: 6 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 100,921 CNY
Estimated Monthly Salary: 8,410 CNY
Estimated Weekly Salary: 1,941 CNY per week
Estimated Hourly Salary: 49 CNY per hour
By working as Metrology Calibration Technician a person can save up to 539 USD per month or 6,462 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in China, see costs of living in China.
Estimated Yearly Salary for Metrology Calibration Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Umpire referee or other sports official (67,522 CNY per year, pre-tax.)
Digital assets manager (126,216 CNY per year, pre-tax.)
It governance manager (171,440 CNY per year, pre-tax.)
Session musician (102,173 CNY per year, pre-tax.)
Pastoral assistant (76,721 CNY per year, pre-tax.)
Metrology Calibration Technician salary in China
Average Yearly Salary of Metrology Calibration Technician in China is approximately 100,921 CNY (12,630 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Metrology Calibration Technician do?
A Metrology Calibration Technician is responsible for ensuring the accuracy and precision of measurement and testing equipment used in various industries. They calibrate and maintain instruments such as gauges, meters, scales, oscilloscopes, and thermometers to ensure they meet specified standards and regulations. These technicians perform adjustments, repairs, and troubleshooting of equipment to ensure accurate readings and reliable performance. They may also create calibration procedures, document test results, and maintain calibration records.
Skills: Metrology, Calibration, Technician, Measurement, Equipment, Testing
Job industry: Manufacturing
Job industry: Manufacturing
How much does Metrology Calibration Technician make?
Salary details
How much does Metrology Calibration Technician make?Estimated Yearly Salary: 100,921 CNY
Estimated Monthly Salary: 8,410 CNY
Estimated Weekly Salary: 1,941 CNY per week
Estimated Hourly Salary: 49 CNY per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 97,488 CNYEstimated Monthly Salary: 8,124 CNY
Estimated Weekly Salary: 1,875 CNY per week
Estimated Hourly Salary: 47 CNY per hour
Last revision of data: 2024-01-08Metrology Calibration Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 12,630 USD
Estimated Monthly Salary: 1,053 USD
Estimated Weekly Salary: 243 USD per week
Estimated Hourly Salary: 6 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
China is a vast country located in East Asia. It has the largest population in the world, with over 1.4 billion people. The country covers an expansive area of approximately 9.6 million square kilometers. China shares borders with 14 countries and has diverse geographical features, including mountains, plateaus, and plains.
Estimated national average yearly salary is 92,134 CNY (12,850 USD). Value indicated is pre-tax. Below graph shows estimated Metrology Calibration Technician job salary compared to average salary in China.
Comparison shows that a person working as Metrology Calibration Technician in China earns on average:
1.1 times the average salary (or 110% of average salary).
Estimated national average yearly salary is 92,134 CNY (12,850 USD). Value indicated is pre-tax. Below graph shows estimated Metrology Calibration Technician job salary compared to average salary in China.
Comparison shows that a person working as Metrology Calibration Technician in China earns on average:
1.1 times the average salary (or 110% of average salary).
Is Metrology Calibration Technician a well paid job?
Yes, our data show that Metrology Calibration Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Metrology Calibration Technician?
High salary for Metrology Calibration Technician would be somewhere between 111,013 CNY and 146,335 CNY. However this is an estimation based on Gaussian Distribution.How much can you save working as Metrology Calibration Technician in China?
Living in China the approximate monthly expenses are: 514 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 100,921 CNY
Estimated Monthly Salary: 8,410 CNY
Estimated Weekly Salary: 1,941 CNY per week
Estimated Hourly Salary: 49 CNY per hour
By working as Metrology Calibration Technician a person can save up to 539 USD per month or 6,462 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in China, see costs of living in China.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Russia, Mongolia, Kazakhstan, Kyrgyzstan, Tajikistan, Afghanistan, Pakistan, India, Nepal, Bhutan, Myanmar (Burma), Laos, Vietnam, North Korea. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Metrology Calibration Technician
Russia is 12,594 USD
Afghanistan is 5,887 USD
Pakistan is 1,555 USD
India is 21,883 USD
Nepal is 7,191 USD
Vietnam is 3,945 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in China
(1,075,420 CNY per year, pre-tax.)
2. Cardiologist
(893,602 CNY per year, pre-tax.)
(861,748 CNY per year, pre-tax.)
4. Neurosurgeon
(835,990 CNY per year, pre-tax.)
(833,048 CNY per year, pre-tax.)
6. Urologist
(818,021 CNY per year, pre-tax.)
(817,649 CNY per year, pre-tax.)
(817,013 CNY per year, pre-tax.)
(813,232 CNY per year, pre-tax.)
10. Oncologist
(812,783 CNY per year, pre-tax.)
Data as of 2025Random salary:
Umpire referee or other sports official (67,522 CNY per year, pre-tax.)
Digital assets manager (126,216 CNY per year, pre-tax.)
It governance manager (171,440 CNY per year, pre-tax.)
Session musician (102,173 CNY per year, pre-tax.)
Pastoral assistant (76,721 CNY per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=china&job=metrology-calibration-technician'><img src='https://optisalary.com/wp-content/graphs/salary/metrology-calibration-technician-salary-in-china-2025.jpg' alt='metrology calibration technician salary in china 2025' title='metrology calibration technician salary in china 2025' /></a>
Please note:The salary data presented here are meant for informational purposes solely.
This website aggregates salary data for informational use only. We strive to provide reliable figures, but do not guarantee their validity. Users are urged to consult alternative platforms before making employment choices. Salary ranges can fluctuate due to company policies, market demands, and skills. We assume no liability for inconsistencies in the salary data provided. Your engagement with this site confirms understanding of this disclaimer.
The salary figures on optisalary.com are meant for informational purposes only. We compile salary data from multiple sources, but do not ensure absolute precision. Users should on their own verify salaries before making career commitments. Salary variations occur due to industry standards, demand shifts, and location. We deny any guarantee regarding the validity of the provided salary data. By using this site, you agree that salary data is not definitive.