Home > Salary > China > Injection Molding Engineer
An injection molding engineer is responsible for designing and developing manufacturing processes for plastic injection molding. They work closely with product designers to ensure that the design can be effectively produced using injection molding techniques. The engineer analyzes product specifications, creates molds, and determines the appropriate materials and machinery required for the production process. They also troubleshoot any issues that may arise during production and make necessary adjustments to improve efficiency and quality. Additionally, they may collaborate with suppliers to source materials and equipment, and conduct testing and analysis to ensure compliance with industry standards.
Estimated Yearly Salary: 130,303 CNY
Estimated Monthly Salary: 10,859 CNY
Estimated Weekly Salary: 2,506 CNY per week
Estimated Hourly Salary: 63 CNY per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 10,458 CNY
Estimated Weekly Salary: 2,413 CNY per week
Estimated Hourly Salary: 60 CNY per hour
Last revision of data: 2024-01-03
Estimated Yearly Salary: 16,174 USD
Estimated Monthly Salary: 1,348 USD
Estimated Weekly Salary: 311 USD per week
Estimated Hourly Salary: 8 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 130,303 CNY
Estimated Monthly Salary: 10,859 CNY
Estimated Weekly Salary: 2,506 CNY per week
Estimated Hourly Salary: 63 CNY per hour
By working as Injection Molding Engineer a person can save up to 834 USD per month or 10,006 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in China, see costs of living in China.
Estimated Yearly Salary for Injection Molding Engineer
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Project manager right of way (149,258 CNY per year, pre-tax.)
Meter reader (61,632 CNY per year, pre-tax.)
Asic design engineer (206,176 CNY per year, pre-tax.)
Assistant program manager (unspecified type general) (106,654 CNY per year, pre-tax.)
Patient access representative (64,022 CNY per year, pre-tax.)
Injection Molding Engineer salary in China
Average Yearly Salary of Injection Molding Engineer in China is approximately 130,303 CNY (16,174 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Injection Molding Engineer do?
An injection molding engineer is responsible for designing and developing manufacturing processes for plastic injection molding. They work closely with product designers to ensure that the design can be effectively produced using injection molding techniques. The engineer analyzes product specifications, creates molds, and determines the appropriate materials and machinery required for the production process. They also troubleshoot any issues that may arise during production and make necessary adjustments to improve efficiency and quality. Additionally, they may collaborate with suppliers to source materials and equipment, and conduct testing and analysis to ensure compliance with industry standards.
Skills: Injection Molding Engineer, Manufacturing Process, Plastic Injection Molding, Product Design, Mold Design, Material Selection
Job industry: Manufacturing
Job industry: Manufacturing
How much does Injection Molding Engineer make?
Salary details
How much does Injection Molding Engineer make?Estimated Yearly Salary: 130,303 CNY
Estimated Monthly Salary: 10,859 CNY
Estimated Weekly Salary: 2,506 CNY per week
Estimated Hourly Salary: 63 CNY per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 125,496 CNYEstimated Monthly Salary: 10,458 CNY
Estimated Weekly Salary: 2,413 CNY per week
Estimated Hourly Salary: 60 CNY per hour
Last revision of data: 2024-01-03Injection Molding Engineer estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 16,174 USD
Estimated Monthly Salary: 1,348 USD
Estimated Weekly Salary: 311 USD per week
Estimated Hourly Salary: 8 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
China is a vast country located in East Asia. It has the largest population in the world, with over 1.4 billion people. The country covers an expansive area of approximately 9.6 million square kilometers. China shares borders with 14 countries and has diverse geographical features, including mountains, plateaus, and plains.
Estimated national average yearly salary is 92,134 CNY (12,850 USD). Value indicated is pre-tax. Below graph shows estimated Injection Molding Engineer job salary compared to average salary in China.
Comparison shows that a person working as Injection Molding Engineer in China earns on average:
1.41 times the average salary (or 141% of average salary).
Estimated national average yearly salary is 92,134 CNY (12,850 USD). Value indicated is pre-tax. Below graph shows estimated Injection Molding Engineer job salary compared to average salary in China.
Comparison shows that a person working as Injection Molding Engineer in China earns on average:
1.41 times the average salary (or 141% of average salary).
Is Injection Molding Engineer a well paid job?
Yes, our data shows that Injection Molding Engineer is a well paid job. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Injection Molding Engineer?
High salary for Injection Molding Engineer would be somewhere between 143,333 CNY and 188,939 CNY. However this is an estimation based on Gaussian Distribution.How much can you save working as Injection Molding Engineer in China?
Living in China the approximate monthly expenses are: 514 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 130,303 CNY
Estimated Monthly Salary: 10,859 CNY
Estimated Weekly Salary: 2,506 CNY per week
Estimated Hourly Salary: 63 CNY per hour
By working as Injection Molding Engineer a person can save up to 834 USD per month or 10,006 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in China, see costs of living in China.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Russia, Mongolia, Kazakhstan, Kyrgyzstan, Tajikistan, Afghanistan, Pakistan, India, Nepal, Bhutan, Myanmar (Burma), Laos, Vietnam, North Korea. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Injection Molding Engineer
Russia is 16,182 USD
Afghanistan is 7,592 USD
Pakistan is 1,996 USD
India is 28,306 USD
Nepal is 9,244 USD
Vietnam is 5,084 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in China
(1,075,420 CNY per year, pre-tax.)
2. Cardiologist
(893,602 CNY per year, pre-tax.)
(861,748 CNY per year, pre-tax.)
4. Neurosurgeon
(835,990 CNY per year, pre-tax.)
(833,048 CNY per year, pre-tax.)
6. Urologist
(818,021 CNY per year, pre-tax.)
(817,649 CNY per year, pre-tax.)
(817,013 CNY per year, pre-tax.)
(813,232 CNY per year, pre-tax.)
10. Oncologist
(812,783 CNY per year, pre-tax.)
Data as of 2025Random salary:
Project manager right of way (149,258 CNY per year, pre-tax.)
Meter reader (61,632 CNY per year, pre-tax.)
Asic design engineer (206,176 CNY per year, pre-tax.)
Assistant program manager (unspecified type general) (106,654 CNY per year, pre-tax.)
Patient access representative (64,022 CNY per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=china&job=injection-molding-engineer'><img src='https://optisalary.com/wp-content/graphs/salary/injection-molding-engineer-salary-in-china-2025.jpg' alt='injection molding engineer salary in china 2025' title='injection molding engineer salary in china 2025' /></a>
Please note:optisalary.com presents salary data for reference use exclusively.
The salary data presented here are meant for informational purposes only. While we strive to ensure accuracy, we cannot guarantee all figures is flawless. Users should to research salary details with official authorities before making critical financial choices. Salary ranges may fluctuate due to economic shifts, demand variations, and regional factors. We disclaim responsibility for errors in the compensation data displayed.
The salary figures on optisalary.com are meant for informational use exclusively. We compile salary data from multiple sources, but do not ensure complete accuracy. Users should independently confirm salaries before making financial commitments. Salary fluctuations occur due to industry standards, demand shifts, and location. We disclaim any guarantee regarding the validity of the provided salary data. By accessing this site, you agree that salary data is subject to updates.