Home > Salary > Cambodia > Lathe Operator Numerical Control
A lathe operator numerical control is responsible for operating and maintaining computer-controlled machines that shape and cut metal, wood, or other materials. They read blueprints, set up the machine, and input instructions into the computer system to produce precise and accurate parts. The operator monitors the machine's performance, makes adjustments as needed, and ensures the quality of the finished product. They may also perform routine maintenance on the machine and troubleshoot any issues that arise during the production process. This occupation requires strong technical skills, attention to detail, and the ability to interpret complex instructions and measurements.
Estimated Yearly Salary: 5,942,820 KHR
Estimated Monthly Salary: 495,235 KHR
Estimated Weekly Salary: 114,285 KHR per week
Estimated Hourly Salary: 2,857 KHR per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 477,067 KHR
Estimated Weekly Salary: 110,092 KHR per week
Estimated Hourly Salary: 2,752 KHR per hour
Last revision of data: 2024-01-05
Estimated Yearly Salary: 1,329 USD
Estimated Monthly Salary: 111 USD
Estimated Weekly Salary: 26 USD per week
Estimated Hourly Salary: 1 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 5,942,820 KHR
Estimated Monthly Salary: 495,235 KHR
Estimated Weekly Salary: 114,285 KHR per week
Estimated Hourly Salary: 2,857 KHR per hour
By working as Lathe Operator Numerical Control a person can save up to 43 USD per month or 513 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Cambodia, see costs of living in Cambodia.
Estimated Yearly Salary for Lathe Operator Numerical Control
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
National sales representative (8,097,032 KHR per year, pre-tax.)
Farm workercrop field (2,898,821 KHR per year, pre-tax.)
Test quality assurance (qa), analyst (computer software) (9,207,132 KHR per year, pre-tax.)
Veterinary acupuncturist (11,340,864 KHR per year, pre-tax.)
Administrative specialist (5,658,759 KHR per year, pre-tax.)
Lathe Operator Numerical Control salary in Cambodia
Average Yearly Salary of Lathe Operator Numerical Control in Cambodia is approximately 5,942,820 KHR (1,329 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Lathe Operator Numerical Control do?
A lathe operator numerical control is responsible for operating and maintaining computer-controlled machines that shape and cut metal, wood, or other materials. They read blueprints, set up the machine, and input instructions into the computer system to produce precise and accurate parts. The operator monitors the machine's performance, makes adjustments as needed, and ensures the quality of the finished product. They may also perform routine maintenance on the machine and troubleshoot any issues that arise during the production process. This occupation requires strong technical skills, attention to detail, and the ability to interpret complex instructions and measurements.
Skills: lathe operator, numerical control, computer-controlled machines, metalworking, precision machining, technical skills
Job industry: Manufacturing
Job industry: Manufacturing
How much does Lathe Operator Numerical Control make?
Salary details
How much does Lathe Operator Numerical Control make?Estimated Yearly Salary: 5,942,820 KHR
Estimated Monthly Salary: 495,235 KHR
Estimated Weekly Salary: 114,285 KHR per week
Estimated Hourly Salary: 2,857 KHR per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 5,724,804 KHREstimated Monthly Salary: 477,067 KHR
Estimated Weekly Salary: 110,092 KHR per week
Estimated Hourly Salary: 2,752 KHR per hour
Last revision of data: 2024-01-05Lathe Operator Numerical Control estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 1,329 USD
Estimated Monthly Salary: 111 USD
Estimated Weekly Salary: 26 USD per week
Estimated Hourly Salary: 1 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Cambodia is a Southeast Asian country located on the Indochinese Peninsula. It has a population of approximately 16 million people and covers an area of around 181,035 square kilometers. The country shares borders with Thailand to the northwest, Laos to the northeast, Vietnam to the east, and the Gulf of Thailand to the southwest. Cambodia is known for its rich history, diverse culture, and ancient temples, including the famous Angkor Wat.
Estimated national average yearly salary is 6,980,200 KHR (1,700 USD). Value indicated is pre-tax. Below graph shows estimated Lathe Operator Numerical Control job salary compared to average salary in Cambodia.
Comparison shows that a person working as Lathe Operator Numerical Control in Cambodia earns on average:
0.85 times the average salary (or 85% of average salary).
Estimated national average yearly salary is 6,980,200 KHR (1,700 USD). Value indicated is pre-tax. Below graph shows estimated Lathe Operator Numerical Control job salary compared to average salary in Cambodia.
Comparison shows that a person working as Lathe Operator Numerical Control in Cambodia earns on average:
0.85 times the average salary (or 85% of average salary).
Is Lathe Operator Numerical Control a well paid job?
Yes, our data show that Lathe Operator Numerical Control is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Lathe Operator Numerical Control?
High salary for Lathe Operator Numerical Control would be somewhere between 6,537,102 KHR and 8,617,089 KHR. However this is an estimation based on Gaussian Distribution.How much can you save working as Lathe Operator Numerical Control in Cambodia?
Living in Cambodia the approximate monthly expenses are: 68 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 5,942,820 KHR
Estimated Monthly Salary: 495,235 KHR
Estimated Weekly Salary: 114,285 KHR per week
Estimated Hourly Salary: 2,857 KHR per hour
By working as Lathe Operator Numerical Control a person can save up to 43 USD per month or 513 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Cambodia, see costs of living in Cambodia.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Thailand, Laos, Vietnam. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Lathe Operator Numerical Control
Thailand is 5,608 USD
Vietnam is 3,111 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Cambodia
(79,316,494 KHR per year, pre-tax.)
2. Cardiologist
(66,311,788 KHR per year, pre-tax.)
(63,799,708 KHR per year, pre-tax.)
4. Neurosurgeon
(61,766,852 KHR per year, pre-tax.)
(61,586,966 KHR per year, pre-tax.)
6. Oncologist
(60,540,253 KHR per year, pre-tax.)
(60,445,007 KHR per year, pre-tax.)
(60,440,848 KHR per year, pre-tax.)
9. Urologist
(60,412,810 KHR per year, pre-tax.)
10. Dermatologist
(60,299,365 KHR per year, pre-tax.)
Data as of 2025Random salary:
National sales representative (8,097,032 KHR per year, pre-tax.)
Farm workercrop field (2,898,821 KHR per year, pre-tax.)
Test quality assurance (qa), analyst (computer software) (9,207,132 KHR per year, pre-tax.)
Veterinary acupuncturist (11,340,864 KHR per year, pre-tax.)
Administrative specialist (5,658,759 KHR per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=cambodia&job=lathe-operator-numerical-control'><img src='https://optisalary.com/wp-content/graphs/salary/lathe-operator-numerical-control-salary-in-cambodia-2025.jpg' alt='lathe operator numerical control salary in cambodia 2025' title='lathe operator numerical control salary in cambodia 2025' /></a>
Please note:This website presents salary estimates for educational purposes only.
Salary information displayed on this site is informational only. Our figures are compiled various inputs, but we do not guarantee absolute correctness. Users must always verify salary details with official platforms before making financial decisions. Salaries fluctuate due to economic trends, job location, and negotiation skills. We cannot offer any assurances about the validity of the provided salary data. By navigating this site, you acknowledge these terms.
Salary information displayed on this site is informational exclusively. Our figures are compiled various inputs, but we cannot guarantee their accuracy. Users must always double-check salary details with official resources before making financial decisions. Salaries fluctuate due to individual experience, market demand, and employer policies. We make no warranties about the validity of the provided salary data. By navigating this site, you acknowledge these limitations.