Home > Salary > Brazil > Mechanical Calibration Technician
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Estimated Yearly Salary: 38,064 BRL
Estimated Monthly Salary: 3,172 BRL
Estimated Weekly Salary: 732 BRL per week
Estimated Hourly Salary: 18 BRL per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 3,061 BRL
Estimated Weekly Salary: 706 BRL per week
Estimated Hourly Salary: 18 BRL per hour
Last revision of data: 2024-01-09
Estimated Yearly Salary: 6,349 USD
Estimated Monthly Salary: 529 USD
Estimated Weekly Salary: 122 USD per week
Estimated Hourly Salary: 3 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 38,064 BRL
Estimated Monthly Salary: 3,172 BRL
Estimated Weekly Salary: 732 BRL per week
Estimated Hourly Salary: 18 BRL per hour
By working as Mechanical Calibration Technician a person can save up to 203 USD per month or 2,442 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Brazil, see costs of living in Brazil.
Estimated Yearly Salary for Mechanical Calibration Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Bank president (148,180 BRL per year, pre-tax.)
Parts counterman (27,150 BRL per year, pre-tax.)
Medical perfusionist (114,456 BRL per year, pre-tax.)
Senior learning facilitator (51,696 BRL per year, pre-tax.)
Jewelry photographer (24,206 BRL per year, pre-tax.)
Mechanical Calibration Technician salary in Brazil
Average Yearly Salary of Mechanical Calibration Technician in Brazil is approximately 38,064 BRL (6,349 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Mechanical Calibration Technician do?
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Skills: Mechanical calibration, Precision instruments, Measurement accuracy, Calibration procedures, Technical specifications, Quality control.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Mechanical Calibration Technician make?
Salary details
How much does Mechanical Calibration Technician make?Estimated Yearly Salary: 38,064 BRL
Estimated Monthly Salary: 3,172 BRL
Estimated Weekly Salary: 732 BRL per week
Estimated Hourly Salary: 18 BRL per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 36,732 BRLEstimated Monthly Salary: 3,061 BRL
Estimated Weekly Salary: 706 BRL per week
Estimated Hourly Salary: 18 BRL per hour
Last revision of data: 2024-01-09Mechanical Calibration Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 6,349 USD
Estimated Monthly Salary: 529 USD
Estimated Weekly Salary: 122 USD per week
Estimated Hourly Salary: 3 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Brazil is a country located in South America, known for its vibrant culture, diverse landscapes, and rich biodiversity. It is the fifth-largest country in the world by both land area and population. With an estimated population of over 211 million people, Brazil is the most populous country in South America and the sixth-most populous in the world.
Estimated national average yearly salary is 44,184 BRL (8,140 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Brazil.
Comparison shows that a person working as Mechanical Calibration Technician in Brazil earns on average:
0.86 times the average salary (or 86% of average salary).
Estimated national average yearly salary is 44,184 BRL (8,140 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Brazil.
Comparison shows that a person working as Mechanical Calibration Technician in Brazil earns on average:
0.86 times the average salary (or 86% of average salary).
Is Mechanical Calibration Technician a well paid job?
Yes, our data show that Mechanical Calibration Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Mechanical Calibration Technician?
High salary for Mechanical Calibration Technician would be somewhere between 41,870 BRL and 55,193 BRL. However this is an estimation based on Gaussian Distribution.How much can you save working as Mechanical Calibration Technician in Brazil?
Living in Brazil the approximate monthly expenses are: 326 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 38,064 BRL
Estimated Monthly Salary: 3,172 BRL
Estimated Weekly Salary: 732 BRL per week
Estimated Hourly Salary: 18 BRL per hour
By working as Mechanical Calibration Technician a person can save up to 203 USD per month or 2,442 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Brazil, see costs of living in Brazil.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Argentina, Bolivia, Colombia, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Mechanical Calibration Technician
Argentina is 9,043 USD
Bolivia is 483 USD
Colombia is 5,048 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Brazil
(510,623 BRL per year, pre-tax.)
2. Cardiologist
(424,775 BRL per year, pre-tax.)
(408,609 BRL per year, pre-tax.)
4. Neurosurgeon
(398,384 BRL per year, pre-tax.)
(397,475 BRL per year, pre-tax.)
(388,802 BRL per year, pre-tax.)
7. Urologist
(387,799 BRL per year, pre-tax.)
(387,672 BRL per year, pre-tax.)
(387,519 BRL per year, pre-tax.)
(387,230 BRL per year, pre-tax.)
Data as of 2025Random salary:
Bank president (148,180 BRL per year, pre-tax.)
Parts counterman (27,150 BRL per year, pre-tax.)
Medical perfusionist (114,456 BRL per year, pre-tax.)
Senior learning facilitator (51,696 BRL per year, pre-tax.)
Jewelry photographer (24,206 BRL per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=brazil&job=mechanical-calibration-technician'><img src='https://optisalary.com/wp-content/graphs/salary/mechanical-calibration-technician-salary-in-brazil-2025.jpg' alt='mechanical calibration technician salary in brazil 2025' title='mechanical calibration technician salary in brazil 2025' /></a>
Please note:The salary figures on optisalary.com are meant for informational purposes exclusively.
All salary figures on this website are for reference purposes only. We compile data from various trusted sources, yet cannot guarantee complete precision. Before making career choices, users should cross-check with additional authoritative sources. Salaries fluctuate due to various factors, including negotiation skills, industry demand, and experience levels. We disclaim any responsibility for misrepresentations in the salary estimates provided here. Your engagement with this website indicates acceptance of this disclaimer.
All salary figures on optisalary.com are for informational purposes only. We gather data from various reliable databases, yet cannot ensure complete accuracy. Before making career decisions, users should consult additional verified sources. Salaries change due to various influences, including negotiation skills, industry demand, and experience levels. We disclaim any liability for misrepresentations in the salary estimates provided here. Your use with optisalary.com constitutes acceptance of this disclaimer.