Home > Salary > Bangladesh > Senior Tooling Engineer
A senior tooling engineer is responsible for designing, developing, and implementing tools and equipment used in manufacturing processes. They work closely with cross-functional teams to understand production requirements and develop innovative solutions to enhance productivity, efficiency, and quality. Senior tooling engineers also provide technical expertise and guidance to junior engineers and technicians in the design, fabrication, and maintenance of tools and equipment. They conduct feasibility studies, cost analysis, and risk assessments to ensure the successful implementation of new tooling technologies. Additionally, they collaborate with suppliers to source and evaluate new materials and technologies that can improve tooling performance.
Estimated Yearly Salary: 642,971 BDT
Estimated Monthly Salary: 53,581 BDT
Estimated Weekly Salary: 12,365 BDT per week
Estimated Hourly Salary: 309 BDT per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 51,684 BDT
Estimated Weekly Salary: 11,927 BDT per week
Estimated Hourly Salary: 298 BDT per hour
Last revision of data: 2024-01-05
Estimated Yearly Salary: 5,445 USD
Estimated Monthly Salary: 454 USD
Estimated Weekly Salary: 105 USD per week
Estimated Hourly Salary: 3 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 642,971 BDT
Estimated Monthly Salary: 53,581 BDT
Estimated Weekly Salary: 12,365 BDT per week
Estimated Hourly Salary: 309 BDT per hour
By working as Senior Tooling Engineer a person can save up to 341 USD per month or 4,091 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Bangladesh, see costs of living in Bangladesh.
Estimated Yearly Salary for Senior Tooling Engineer
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Underwriter municipal bonds (575,913 BDT per year, pre-tax.)
Food beverage outlet manager (260,998 BDT per year, pre-tax.)
Quality administrative assistant (199,538 BDT per year, pre-tax.)
Fbi agent (314,820 BDT per year, pre-tax.)
Database engineer (472,068 BDT per year, pre-tax.)
Senior Tooling Engineer salary in Bangladesh
Average Yearly Salary of Senior Tooling Engineer in Bangladesh is approximately 642,971 BDT (5,445 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Senior Tooling Engineer do?
A senior tooling engineer is responsible for designing, developing, and implementing tools and equipment used in manufacturing processes. They work closely with cross-functional teams to understand production requirements and develop innovative solutions to enhance productivity, efficiency, and quality. Senior tooling engineers also provide technical expertise and guidance to junior engineers and technicians in the design, fabrication, and maintenance of tools and equipment. They conduct feasibility studies, cost analysis, and risk assessments to ensure the successful implementation of new tooling technologies. Additionally, they collaborate with suppliers to source and evaluate new materials and technologies that can improve tooling performance.
Skills: senior tooling engineer, manufacturing, tool design, equipment development, process improvement, technical expertise
Job industry: Manufacturing
Job industry: Manufacturing
How much does Senior Tooling Engineer make?
Salary details
How much does Senior Tooling Engineer make?Estimated Yearly Salary: 642,971 BDT
Estimated Monthly Salary: 53,581 BDT
Estimated Weekly Salary: 12,365 BDT per week
Estimated Hourly Salary: 309 BDT per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 620,208 BDTEstimated Monthly Salary: 51,684 BDT
Estimated Weekly Salary: 11,927 BDT per week
Estimated Hourly Salary: 298 BDT per hour
Last revision of data: 2024-01-05Senior Tooling Engineer estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 5,445 USD
Estimated Monthly Salary: 454 USD
Estimated Weekly Salary: 105 USD per week
Estimated Hourly Salary: 3 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Bangladesh, located in South Asia, is a densely populated country with a rich cultural heritage. It has a population of over 160 million people and covers an area of approximately 147,570 square kilometers. Despite being a relatively small country in terms of land area, Bangladesh is the eighth-most populous country in the world.
Estimated national average yearly salary is 304,560 BDT (2,820 USD). Value indicated is pre-tax. Below graph shows estimated Senior Tooling Engineer job salary compared to average salary in Bangladesh.
Comparison shows that a person working as Senior Tooling Engineer in Bangladesh earns on average:
2.11 times the average salary (or 211% of average salary).
Estimated national average yearly salary is 304,560 BDT (2,820 USD). Value indicated is pre-tax. Below graph shows estimated Senior Tooling Engineer job salary compared to average salary in Bangladesh.
Comparison shows that a person working as Senior Tooling Engineer in Bangladesh earns on average:
2.11 times the average salary (or 211% of average salary).
Is Senior Tooling Engineer a well paid job?
Yes, our data show that Senior Tooling Engineer is a very well paid job. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Senior Tooling Engineer?
High salary for Senior Tooling Engineer would be somewhere between 707,268 BDT and 932,308 BDT. However this is an estimation based on Gaussian Distribution.How much can you save working as Senior Tooling Engineer in Bangladesh?
Living in Bangladesh the approximate monthly expenses are: 113 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 642,971 BDT
Estimated Monthly Salary: 53,581 BDT
Estimated Weekly Salary: 12,365 BDT per week
Estimated Hourly Salary: 309 BDT per hour
By working as Senior Tooling Engineer a person can save up to 341 USD per month or 4,091 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Bangladesh, see costs of living in Bangladesh.
Salary comparison to region and neighbouring coutries
Country's neighbours are: India, Myanmar (Burma), Bhutan. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Senior Tooling Engineer
India is 43,076 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Bangladesh
(3,468,551 BDT per year, pre-tax.)
2. Cardiologist
(2,899,173 BDT per year, pre-tax.)
(2,788,975 BDT per year, pre-tax.)
4. Neurosurgeon
(2,696,258 BDT per year, pre-tax.)
(2,693,113 BDT per year, pre-tax.)
6. Oncologist
(2,648,729 BDT per year, pre-tax.)
(2,648,146 BDT per year, pre-tax.)
(2,647,247 BDT per year, pre-tax.)
(2,646,613 BDT per year, pre-tax.)
10. Plastic surgeon
(2,640,498 BDT per year, pre-tax.)
Data as of 2025Random salary:
Underwriter municipal bonds (575,913 BDT per year, pre-tax.)
Food beverage outlet manager (260,998 BDT per year, pre-tax.)
Quality administrative assistant (199,538 BDT per year, pre-tax.)
Fbi agent (314,820 BDT per year, pre-tax.)
Database engineer (472,068 BDT per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=bangladesh&job=senior-tooling-engineer'><img src='https://optisalary.com/wp-content/graphs/salary/senior-tooling-engineer-salary-in-bangladesh-2025.jpg' alt='senior tooling engineer salary in bangladesh 2025' title='senior tooling engineer salary in bangladesh 2025' /></a>
Please note:The salary figures on optisalary.com are meant for reference purposes exclusively.
optisalary.com displays salary data solely for informational use. While we endeavor for correctness, we cannot ensure the validity of all figures. Users must verify salary details with official organizations before making career-related plans. Salary amounts can vary based on multiple elements, such as company size, negotiation tactics, and industry demand. We assume no responsibility for errors in the salary figures provided. By accessing optisalary.com, you accept that salary data is subject to change.
The salary data presented here are intended for informational purposes only. While we strive to ensure correctness, we cannot guarantee every estimate is flawless. Users should to research salary details with independent sources before making important financial choices. Salary amounts can change due to economic shifts, demand variations, and regional factors. We disclaim responsibility for inaccuracies in the salary data displayed.