Home > Salary > Bangladesh > Cnc Service Engineer
A CNC service engineer is responsible for maintaining, repairing, and troubleshooting computer numerical control (CNC) machines used in manufacturing processes. They ensure that the machines are operating efficiently and at optimal performance levels. Their duties include conducting regular inspections, diagnosing and resolving technical issues, calibrating machines, programming software, and providing training to machine operators. They may also be involved in installing new equipment and upgrading existing systems. A CNC service engineer needs to have a strong understanding of mechanical and electrical systems, as well as knowledge of programming languages and computer-aided design (CAD) software. They must possess excellent problem-solving skills and be able to work independently or as part of a team.
Estimated Yearly Salary: 316,112 BDT
Estimated Monthly Salary: 26,343 BDT
Estimated Weekly Salary: 6,079 BDT per week
Estimated Hourly Salary: 152 BDT per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 25,390 BDT
Estimated Weekly Salary: 5,859 BDT per week
Estimated Hourly Salary: 146 BDT per hour
Last revision of data: 2024-01-07
Estimated Yearly Salary: 2,672 USD
Estimated Monthly Salary: 223 USD
Estimated Weekly Salary: 51 USD per week
Estimated Hourly Salary: 1 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 316,112 BDT
Estimated Monthly Salary: 26,343 BDT
Estimated Weekly Salary: 6,079 BDT per week
Estimated Hourly Salary: 152 BDT per hour
By working as Cnc Service Engineer a person can save up to 110 USD per month or 1,318 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Bangladesh, see costs of living in Bangladesh.
Estimated Yearly Salary for Cnc Service Engineer
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Team director (481,248 BDT per year, pre-tax.)
Legal support coordinator (315,532 BDT per year, pre-tax.)
Police detective (424,401 BDT per year, pre-tax.)
Embroidery digitizer (167,508 BDT per year, pre-tax.)
Ocean import agent (286,504 BDT per year, pre-tax.)
Cnc Service Engineer salary in Bangladesh
Average Yearly Salary of Cnc Service Engineer in Bangladesh is approximately 316,112 BDT (2,672 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Cnc Service Engineer do?
A CNC service engineer is responsible for maintaining, repairing, and troubleshooting computer numerical control (CNC) machines used in manufacturing processes. They ensure that the machines are operating efficiently and at optimal performance levels. Their duties include conducting regular inspections, diagnosing and resolving technical issues, calibrating machines, programming software, and providing training to machine operators. They may also be involved in installing new equipment and upgrading existing systems. A CNC service engineer needs to have a strong understanding of mechanical and electrical systems, as well as knowledge of programming languages and computer-aided design (CAD) software. They must possess excellent problem-solving skills and be able to work independently or as part of a team.
Skills: CNC service engineer, maintenance, repair, troubleshooting, CNC machines, mechanical engineering
Job industry: Manufacturing
Job industry: Manufacturing
How much does Cnc Service Engineer make?
Salary details
How much does Cnc Service Engineer make?Estimated Yearly Salary: 316,112 BDT
Estimated Monthly Salary: 26,343 BDT
Estimated Weekly Salary: 6,079 BDT per week
Estimated Hourly Salary: 152 BDT per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 304,676 BDTEstimated Monthly Salary: 25,390 BDT
Estimated Weekly Salary: 5,859 BDT per week
Estimated Hourly Salary: 146 BDT per hour
Last revision of data: 2024-01-07Cnc Service Engineer estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 2,672 USD
Estimated Monthly Salary: 223 USD
Estimated Weekly Salary: 51 USD per week
Estimated Hourly Salary: 1 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Bangladesh, located in South Asia, is a densely populated country with a rich cultural heritage. It has a population of over 160 million people and covers an area of approximately 147,570 square kilometers. Despite being a relatively small country in terms of land area, Bangladesh is the eighth-most populous country in the world.
Estimated national average yearly salary is 304,560 BDT (2,820 USD). Value indicated is pre-tax. Below graph shows estimated Cnc Service Engineer job salary compared to average salary in Bangladesh.
Comparison shows that a person working as Cnc Service Engineer in Bangladesh earns on average:
1.04 times the average salary (or 104% of average salary).
Estimated national average yearly salary is 304,560 BDT (2,820 USD). Value indicated is pre-tax. Below graph shows estimated Cnc Service Engineer job salary compared to average salary in Bangladesh.
Comparison shows that a person working as Cnc Service Engineer in Bangladesh earns on average:
1.04 times the average salary (or 104% of average salary).
Is Cnc Service Engineer a well paid job?
Yes, our data show that Cnc Service Engineer is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Cnc Service Engineer?
High salary for Cnc Service Engineer would be somewhere between 347,723 BDT and 458,362 BDT. However this is an estimation based on Gaussian Distribution.How much can you save working as Cnc Service Engineer in Bangladesh?
Living in Bangladesh the approximate monthly expenses are: 113 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 316,112 BDT
Estimated Monthly Salary: 26,343 BDT
Estimated Weekly Salary: 6,079 BDT per week
Estimated Hourly Salary: 152 BDT per hour
By working as Cnc Service Engineer a person can save up to 110 USD per month or 1,318 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Bangladesh, see costs of living in Bangladesh.
Salary comparison to region and neighbouring coutries
Country's neighbours are: India, Myanmar (Burma), Bhutan. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Cnc Service Engineer
India is 21,186 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Bangladesh
(3,468,551 BDT per year, pre-tax.)
2. Cardiologist
(2,899,173 BDT per year, pre-tax.)
(2,788,975 BDT per year, pre-tax.)
4. Neurosurgeon
(2,696,258 BDT per year, pre-tax.)
(2,693,113 BDT per year, pre-tax.)
6. Oncologist
(2,648,729 BDT per year, pre-tax.)
(2,648,146 BDT per year, pre-tax.)
(2,647,247 BDT per year, pre-tax.)
(2,646,613 BDT per year, pre-tax.)
10. Plastic surgeon
(2,640,498 BDT per year, pre-tax.)
Data as of 2025Random salary:
Team director (481,248 BDT per year, pre-tax.)
Legal support coordinator (315,532 BDT per year, pre-tax.)
Police detective (424,401 BDT per year, pre-tax.)
Embroidery digitizer (167,508 BDT per year, pre-tax.)
Ocean import agent (286,504 BDT per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=bangladesh&job=cnc-service-engineer'><img src='https://optisalary.com/wp-content/graphs/salary/cnc-service-engineer-salary-in-bangladesh-2025.jpg' alt='cnc service engineer salary in bangladesh 2025' title='cnc service engineer salary in bangladesh 2025' /></a>
Please note:The salary data presented here are meant for informational purposes only.
Salary information displayed on this site is informational exclusively. Our figures are compiled various inputs, but we do not guarantee absolute correctness. Users should always double-check salary details with additional resources before making financial decisions. Salaries differ due to economic trends, job location, and negotiation skills. We cannot offer any assurances about the validity of the provided salary data. By continuing to use this site, you acknowledge these terms.
optisalary.com aggregates salary data for informational purposes exclusively. We attempt to provide accurate figures, but do not guarantee their precision. Users are encouraged to check official sources before making employment choices. Salary amounts may fluctuate due to company policies, market demands, and skills. We assume no responsibility for inconsistencies in the salary information provided. Your engagement with this site indicates agreement of this policy.