Home > Salary > Austria > Lathe Operator Numerical Control
A lathe operator numerical control is responsible for operating and maintaining computer-controlled machines that shape and cut metal, wood, or other materials. They read blueprints, set up the machine, and input instructions into the computer system to produce precise and accurate parts. The operator monitors the machine's performance, makes adjustments as needed, and ensures the quality of the finished product. They may also perform routine maintenance on the machine and troubleshoot any issues that arise during the production process. This occupation requires strong technical skills, attention to detail, and the ability to interpret complex instructions and measurements.
Estimated Yearly Salary: 43,807 EUR
Estimated Monthly Salary: 3,651 EUR
Estimated Weekly Salary: 842 EUR per week
Estimated Hourly Salary: 21 EUR per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 3,519 EUR
Estimated Weekly Salary: 812 EUR per week
Estimated Hourly Salary: 20 EUR per hour
Last revision of data: 2024-01-03
Estimated Yearly Salary: 43,565 USD
Estimated Monthly Salary: 3,630 USD
Estimated Weekly Salary: 838 USD per week
Estimated Hourly Salary: 21 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 43,807 EUR
Estimated Monthly Salary: 3,651 EUR
Estimated Weekly Salary: 842 EUR per week
Estimated Hourly Salary: 21 EUR per hour
By working as Lathe Operator Numerical Control a person can save up to 1,385 USD per month or 16,618 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Austria, see costs of living in Austria.
Estimated Yearly Salary for Lathe Operator Numerical Control
Czech Republic is 20,715 USD
52%
Details on Lathe Operator Numerical Control salary in Czech Republic Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Ar analyst (56,176 EUR per year, pre-tax.)
Manager real estate firm (63,533 EUR per year, pre-tax.)
Laboratory analyst chemical (43,609 EUR per year, pre-tax.)
Production planner manufacturing (66,929 EUR per year, pre-tax.)
Knowledge management analyst (49,533 EUR per year, pre-tax.)
Lathe Operator Numerical Control salary in Austria
Average Yearly Salary of Lathe Operator Numerical Control in Austria is approximately 43,807 EUR (43,565 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Lathe Operator Numerical Control do?
A lathe operator numerical control is responsible for operating and maintaining computer-controlled machines that shape and cut metal, wood, or other materials. They read blueprints, set up the machine, and input instructions into the computer system to produce precise and accurate parts. The operator monitors the machine's performance, makes adjustments as needed, and ensures the quality of the finished product. They may also perform routine maintenance on the machine and troubleshoot any issues that arise during the production process. This occupation requires strong technical skills, attention to detail, and the ability to interpret complex instructions and measurements.
Skills: lathe operator, numerical control, computer-controlled machines, metalworking, precision machining, technical skills
Job industry: Manufacturing
Job industry: Manufacturing
How much does Lathe Operator Numerical Control make?
Salary details
How much does Lathe Operator Numerical Control make?Estimated Yearly Salary: 43,807 EUR
Estimated Monthly Salary: 3,651 EUR
Estimated Weekly Salary: 842 EUR per week
Estimated Hourly Salary: 21 EUR per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 42,223 EUREstimated Monthly Salary: 3,519 EUR
Estimated Weekly Salary: 812 EUR per week
Estimated Hourly Salary: 20 EUR per hour
Last revision of data: 2024-01-03Lathe Operator Numerical Control estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 43,565 USD
Estimated Monthly Salary: 3,630 USD
Estimated Weekly Salary: 838 USD per week
Estimated Hourly Salary: 21 USD per hour
Difference in salary year over year or average salary increase is approximately
4 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Austria, officially known as the Republic of Austria, is a landlocked country located in Central Europe. It shares its borders with eight other countries, including Germany, Czech Republic, and Italy. With a population of approximately 8.9 million people, Austria is considered a relatively small country in terms of population. The country covers an area of around 83,879 square kilometers, making it moderately sized.
Estimated national average yearly salary is 53,389 EUR (56,140 USD). Value indicated is pre-tax. Below graph shows estimated Lathe Operator Numerical Control job salary compared to average salary in Austria.
Comparison shows that a person working as Lathe Operator Numerical Control in Austria earns on average:
0.82 times the average salary (or 82% of average salary).
Estimated national average yearly salary is 53,389 EUR (56,140 USD). Value indicated is pre-tax. Below graph shows estimated Lathe Operator Numerical Control job salary compared to average salary in Austria.
Comparison shows that a person working as Lathe Operator Numerical Control in Austria earns on average:
0.82 times the average salary (or 82% of average salary).
Is Lathe Operator Numerical Control a well paid job?
Yes, our data show that Lathe Operator Numerical Control is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Lathe Operator Numerical Control?
High salary for Lathe Operator Numerical Control would be somewhere between 48,188 EUR and 63,520 EUR. However this is an estimation based on Gaussian Distribution.How much can you save working as Lathe Operator Numerical Control in Austria?
Living in Austria the approximate monthly expenses are: 2,246 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 43,807 EUR
Estimated Monthly Salary: 3,651 EUR
Estimated Weekly Salary: 842 EUR per week
Estimated Hourly Salary: 21 EUR per hour
By working as Lathe Operator Numerical Control a person can save up to 1,385 USD per month or 16,618 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Austria, see costs of living in Austria.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Germany, Czech Republic, Slovakia, Hungary, Slovenia, Italy, Switzerland, Liechtenstein. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Lathe Operator Numerical Control
Germany is 41,600 USDCzech Republic is 20,715 USD 52%Details on Lathe Operator Numerical Control salary in Czech Republic
Slovakia is 17,109 USD
Hungary is 14,767 USD
Slovenia is 23,867 USD
Italy is 29,286 USD
Switzerland is 69,525 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Austria
(586,194 EUR per year, pre-tax.)
2. Cardiologist
(487,911 EUR per year, pre-tax.)
(469,897 EUR per year, pre-tax.)
4. Neurosurgeon
(456,339 EUR per year, pre-tax.)
(455,242 EUR per year, pre-tax.)
(446,800 EUR per year, pre-tax.)
7. Urologist
(446,584 EUR per year, pre-tax.)
(446,282 EUR per year, pre-tax.)
9. Oncologist
(445,114 EUR per year, pre-tax.)
(444,714 EUR per year, pre-tax.)
Data as of 2025Random salary:
Ar analyst (56,176 EUR per year, pre-tax.)
Manager real estate firm (63,533 EUR per year, pre-tax.)
Laboratory analyst chemical (43,609 EUR per year, pre-tax.)
Production planner manufacturing (66,929 EUR per year, pre-tax.)
Knowledge management analyst (49,533 EUR per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=austria&job=lathe-operator-numerical-control'><img src='https://optisalary.com/wp-content/graphs/salary/lathe-operator-numerical-control-salary-in-austria-2025.jpg' alt='lathe operator numerical control salary in austria 2025' title='lathe operator numerical control salary in austria 2025' /></a>
Please note:The salary estimates on this website are meant for informational use only.
The salary figures on optisalary.com are meant for reference use only. We compile salary data from varied providers, but do not ensure absolute accuracy. Users must on their own confirm salaries before making career commitments. Salary fluctuations occur due to company policies, negotiation skills, and experience levels. We deny any guarantee regarding the correctness of the listed salary data. By accessing this site, you agree that salary data is not definitive.
The salary figures on this website are meant for informational purposes exclusively. We compile salary data from multiple sources, but cannot guarantee complete precision. Users must independently verify salaries before making career commitments. Salary variations occur due to company policies, negotiation skills, and experience levels. We deny any warranty regarding the correctness of the listed salary data. By using this site, you acknowledge that salary data is not definitive.