Home > Salary > Afghanistan > Mechanical Calibration Technician
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Estimated Yearly Salary: 429,300 AFN
Estimated Monthly Salary: 35,775 AFN
Estimated Weekly Salary: 8,256 AFN per week
Estimated Hourly Salary: 206 AFN per hour
Values are pre-tax
Last revision of data: 2025-01-04
Estimated Monthly Salary: 34,600 AFN
Estimated Weekly Salary: 7,985 AFN per week
Estimated Hourly Salary: 200 AFN per hour
Last revision of data: 2024-01-06
Estimated Yearly Salary: 4,686 USD
Estimated Monthly Salary: 391 USD
Estimated Weekly Salary: 90 USD per week
Estimated Hourly Salary: 2 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %
Data confidence is - relatively high
Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Estimated Yearly Salary: 429,300 AFN
Estimated Monthly Salary: 35,775 AFN
Estimated Weekly Salary: 8,256 AFN per week
Estimated Hourly Salary: 206 AFN per hour
By working as Mechanical Calibration Technician a person can save up to 151 USD per month or 1,806 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Afghanistan, see costs of living in Afghanistan.
Estimated Yearly Salary for Mechanical Calibration Technician
Last revision of data: 2025-01-04
Data as of 2025
Random salary:
Bookkeeping accounting or auditing clerk (334,620 AFN per year, pre-tax.)
Comic book artist (374,364 AFN per year, pre-tax.)
Residence supervisor (371,828 AFN per year, pre-tax.)
Associate editor print (457,240 AFN per year, pre-tax.)
Solar installation electrician (481,344 AFN per year, pre-tax.)
Mechanical Calibration Technician salary in Afghanistan
Average Yearly Salary of Mechanical Calibration Technician in Afghanistan is approximately 429,300 AFN (4,686 USD). Data is for 2025 and indicates a pre-tax value. The salary itself depends on multiple factors such as seniority, job performance, certifications, experience or any other bonuses. The value indicated is an average amount based on records we have in database. Real values may vary. The data is for orientational purposes.
What does Mechanical Calibration Technician do?
A mechanical calibration technician is responsible for ensuring the accuracy and precision of various mechanical instruments and equipment. They perform calibration procedures, measurements, and adjustments to ensure that the devices are operating within specified tolerances. This occupation requires a strong understanding of mechanical principles, as well as the ability to interpret technical specifications and measurement data. Mechanical calibration technicians work in a variety of industries, such as manufacturing, aerospace, automotive, and medical, where precise measurements are crucial for quality control and compliance with industry standards. They use specialized tools and equipment to calibrate and troubleshoot mechanical systems, and may also be involved in writing calibration procedures and maintaining calibration records.
Skills: Mechanical calibration, Precision instruments, Measurement accuracy, Calibration procedures, Technical specifications, Quality control.
Job industry: Manufacturing
Job industry: Manufacturing
How much does Mechanical Calibration Technician make?
Salary details
How much does Mechanical Calibration Technician make?Estimated Yearly Salary: 429,300 AFN
Estimated Monthly Salary: 35,775 AFN
Estimated Weekly Salary: 8,256 AFN per week
Estimated Hourly Salary: 206 AFN per hour
Values are pre-tax Last revision of data: 2025-01-04Comparing salary to last year:
Estimated Yearly Salary: 415,196 AFNEstimated Monthly Salary: 34,600 AFN
Estimated Weekly Salary: 7,985 AFN per week
Estimated Hourly Salary: 200 AFN per hour
Last revision of data: 2024-01-06Mechanical Calibration Technician estimated salary in USD
For easier comparison here is an estimated salary in USD:Estimated Yearly Salary: 4,686 USD
Estimated Monthly Salary: 391 USD
Estimated Weekly Salary: 90 USD per week
Estimated Hourly Salary: 2 USD per hour
Difference in salary year over year or average salary increase is approximately
3 %About these results
Data confidence is - relatively high Data fetched from dabase: 14 submissions.
Results are anonymized. Amounts indicated are pre-tax, meaning no deductionts yet have been made to the basic salary. Salaries where there are less than 3 entries are not displayed.
Want to check how your salary compares? Submit your own salary here
Compare salary to other countries
Please type in your occupation and select desired country to see latest trends in salaries.
Country:
Salary comparison to National average
Afghanistan is a landlocked country located in South Asia. It has a population of approximately 38 million people and covers an area of around 652,230 square kilometers. The country is bordered by Pakistan to the east and south, Iran to the west, Turkmenistan, Uzbekistan, and Tajikistan to the north, and China to the northeast.
Estimated national average yearly salary is 507,000 AFN (6,000 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Afghanistan.
Comparison shows that a person working as Mechanical Calibration Technician in Afghanistan earns on average:
0.85 times the average salary (or 85% of average salary).
Estimated national average yearly salary is 507,000 AFN (6,000 USD). Value indicated is pre-tax. Below graph shows estimated Mechanical Calibration Technician job salary compared to average salary in Afghanistan.
Comparison shows that a person working as Mechanical Calibration Technician in Afghanistan earns on average:
0.85 times the average salary (or 85% of average salary).
Is Mechanical Calibration Technician a well paid job?
Yes, our data show that Mechanical Calibration Technician is an averagely well paid job that still allows for some yearly savings. With years and experience the salary might increase even further, resulting in higher satisfaction.What is considered a high salary for Mechanical Calibration Technician?
High salary for Mechanical Calibration Technician would be somewhere between 472,230 AFN and 622,485 AFN. However this is an estimation based on Gaussian Distribution.How much can you save working as Mechanical Calibration Technician in Afghanistan?
Living in Afghanistan the approximate monthly expenses are: 240 USD. This amount covers basic needs such as food, housing, clothing, healthcare and education costs for a single person. No luxury expenses such as traveling, leisure, hobbies are included in the estimation.Estimated Yearly Salary: 429,300 AFN
Estimated Monthly Salary: 35,775 AFN
Estimated Weekly Salary: 8,256 AFN per week
Estimated Hourly Salary: 206 AFN per hour
By working as Mechanical Calibration Technician a person can save up to 151 USD per month or 1,806 USD yearly. Values are pre-tax.
NOTE: These values are estimates and are averaged for the whole country. Furthermore the value is likely exaggerated as no other expenses are taken into account in the projection. Unessential expenses are very subjective and are difficult to assess. Most likely the previously estimated number is significantly lower for majority of people. Expenses in different cities across the country may vary. Above values accuracy is low and is based on limited set of data obtained.
For more information regarding expenses in Afghanistan, see costs of living in Afghanistan.
Salary comparison to region and neighbouring coutries
Country's neighbours are: Pakistan, Iran, Turkmenistan, Uzbekistan, Tajikistan, China. To make it easier for comparison a conversion from local currency to USD has been made (conversion rates may vary).Estimated Yearly Salary for Mechanical Calibration Technician
Pakistan is 1,228 USD
Iran is 6,165 USD
China is 9,982 USD Last revision of data: 2025-01-04Salary increase per years of experience
Based on data available the salary increase per years of experience is as following- 0 years (beginner) equals base salary
- 1 to 5 years of experience yields
+12% salary increase- 6 to 10 years of experience yields
+25% salary increase- 11 to 15 years of experience yields
+16% salary increase- 16 to 25 years of experience yields
+9% salary increase- more than 25 years of experience yields
+10% salary increaseTop 10 highest salaries in Afghanistan
(5,769,861 AFN per year, pre-tax.)
2. Cardiologist
(4,782,808 AFN per year, pre-tax.)
(4,620,004 AFN per year, pre-tax.)
4. Neurosurgeon
(4,486,629 AFN per year, pre-tax.)
(4,476,022 AFN per year, pre-tax.)
(4,384,660 AFN per year, pre-tax.)
(4,379,441 AFN per year, pre-tax.)
8. Oncologist
(4,374,889 AFN per year, pre-tax.)
(4,369,806 AFN per year, pre-tax.)
(4,368,734 AFN per year, pre-tax.)
Data as of 2025Random salary:
Bookkeeping accounting or auditing clerk (334,620 AFN per year, pre-tax.)
Comic book artist (374,364 AFN per year, pre-tax.)
Residence supervisor (371,828 AFN per year, pre-tax.)
Associate editor print (457,240 AFN per year, pre-tax.)
Solar installation electrician (481,344 AFN per year, pre-tax.)
Feedback about these results
Please provide feedback by clicking buttons below if you find any of our salaries erroneous.
Link to this graph - use the following code to display the salary graph on your page:
<a href='https://optisalary.com/salary?country=afghanistan&job=mechanical-calibration-technician'><img src='https://optisalary.com/wp-content/graphs/salary/mechanical-calibration-technician-salary-in-afghanistan-2025.jpg' alt='mechanical calibration technician salary in afghanistan 2025' title='mechanical calibration technician salary in afghanistan 2025' /></a>
Please note:The salary estimates on this website are meant for informational purposes only.
optisalary.com aggregates salary data for informational purposes only. We attempt to provide accurate figures, but cannot assure their validity. Users are urged to check alternative platforms before making financial decisions. Salary ranges may fluctuate due to company policies, market demands, and skills. We assume no liability for errors in the salary information provided. Your engagement with this site indicates understanding of this policy.
This website presents salary data for reference purposes only. We strive to provide reliable figures, but do not guarantee their validity. Users are urged to consult official platforms before making financial decisions. Salary amounts can fluctuate due to geographic location, experience, and industry trends. We accept no responsibility for inconsistencies in the salary information provided. Your continued use with this site indicates agreement of this disclaimer.